Edifier W210BT Bedienungsanleitung


Lies die bedienungsanleitung für Edifier W210BT (7 Seiten) kostenlos online; sie gehört zur Kategorie Kopfhörer. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Edifier W210BT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/7
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W 2 1 0 B T
Manual
1. When they’re power o, press and hold the power button for 5s.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
FR 1. Allumer/Éteindre
2. Appairage
5s
1. Lorsqu'ils sont éteints, maintenez le bouton Allumer/Éteindre
appuyé pendant 5secondes. Les voyants LED ve et rouge
clignoteront rapidement.
2. Sélectionnez «EDIFIER W210BT» dans les paramètres de votre
appareil pour vous connecter.
1ère Association
1. Lorsque le casque audio est allumé, il entre en mode d'association
Bluetooth automatiquement. Les voyants LED ve et rouge
clignoteront rapidement.
2. Sélectionnez «EDIFIER W210BT» dans les paramètres de votre
appareil pour vous connecter.
Remarque :
Le casque se connectera automatiquement au dernier appareil
associé lorsque vous l'allumerez dans le futur.
Maintenez le bouton Allumerteindre
appuyé pendant 3secondes.
3s
Indicateur
5s
4. Commandes
Remarque :
1. : Maintenir enfoncé
2. Les images utilisées seent de référence uniquement, et peuvent
ne pas correspondre au produit.
3. Réinitialiser
1. Les écouteurs sont allumés et déconnectés de tous les appareils.
2. Maintenez le bouton « » et « » simultanément pendant 5
secondes.
3. Le voyant d'état clignote en ve jusqu’à ce que la réinitialisation
soit terminée.
4. Lorsque le casque audio est réinitialisé, il entre en mode
d'association Bluetooth automatiquement.
Pour plus d'informations, consultez notre site web:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Modèle: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. Tous droits réseés.
Imprimé en China
AVIS:
Pour les besoins du progrès technique et la mise à niveau du système,
les informations contenues dans ce document peuvent être sujets à
changements à tout moment sans préavis.
Les produits d'EDIFIER seront modiés pour ceaines applications.
Les photos, illustrations et spécications montrées ici peuvent être
légèrement diérentes du produit réel. Si aucune diérence n'est
trouvée, le produit réel prévaut.
3s 5s
x1x3
x1 x1
x2x2
x1
x1
ES 1. Encendido/Apagado
2. Emparejamiento
3. Restablecer
4. Controles
5s
1. Cuando esté apagado, mantenga pulsado el botón de encendido
durante 5s. Los LED verde y rojo parpadearán rápidamente.
2. Seleccione "EDIFIER W210BT" en la conguración de su dispositivo
para conectar.
1r Emparejamiento
1. Cuando los auriculares estén encendidos, pasarán a modo de
emparejamiento Bluetooth automáticamente. Los LED verde y rojo
parpadearán rápidamente.
2. Seleccione "EDIFIER W210BT" en la conguración de su dispositivo
para conectar.
Nota:
Para usos posteriores, los auriculares se conectarán automáticamente
al último dispositivo usado.
Mantenga pulsado el botón de encendido
durante 3s.
3s
Indicador
5s
Nota:
1. : Presionar y mantener
2. Las imágenes aparecen con un n meramente ilustrativo y pueden
variar del producto nal.
1. Los auriculares están encendidos y desconectados de todos los
dispositivos.
2. Mantenga pulsado " " y " " simultáneamente durante 5s.
3. El testigo de estado parpadea en verde hasta que nalice el
reinicio.
4. Cuando los auriculares se hayan reiniciado, pasarán a modo de
emparejamiento Bluetooth automáticamente.
Para más información, visite nuestro sitio web:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Modelo: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. Todos los derechos reseados.
Impreso en China
NOTIFICACIÓN:
Debido a la necesidad de mejorar técnicas y actualizaciones del
sistema, la información aquí contenida puede estar sujeta a cambios
ocasionales sin previo aviso.
Los productos EDIFIER se personalizan para distintas aplicaciones.
Las imágenes e ilustraciones mostradas en este manual pueden ser
ligeramente distintas del producto real. Si se encuentra alguna
diferencia, prevalece el producto real.
3s 5s
x1x3
x1 x1
x2x2
x1
x1


Produktspezifikationen

Marke: Edifier
Kategorie: Kopfhörer
Modell: W210BT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Edifier W210BT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten