Electro Harmonix LPB-1 Bedienungsanleitung

Lies die bedienungsanleitung für Electro Harmonix LPB-1 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 60 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8 Bewertungen. Hast du eine Frage zu Electro Harmonix LPB-1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

LPB-LINEAR POWER BOOSTER 1

-DESCRIPTION-

Congratulations! You have just purchased the LPB-1 Power Booster, a

reissue of the product that first ushered in the age of overdrive in 1968. With

the LPB-1 you’ll be able to increase guitar sustain, and increase the

performance of all other effects, especially distortion devices.

-CONTROLS-

BOOST CONTROL— Adjusts the amount of boost.

FOOTSWITCH — Engages and disengages the effect. When the LED is on

the pedal is engaged. When off, it is in True Bypass mode.

-OPERATION AND WARNINGS-

Power, from the internal 9-volt battery or external battery eliminator, is

activated by plugging into the input. The input cable should be removed

when the unit is not in use to avoid running down the battery. The input

impedance presented at the Input Jack is 43 kohms. The output impedance

at the Output Jack is 10 kohms.

The barrel connector on the front of LPB-1 is for a 9-volt battery eliminator

capable of delivering 100 mA of current. The inner ring of the 9-volt battery

eliminator must be negative, the outer ring positive. The unit’s battery may

be left in or taken out when the eliminator is in use.

To change the 9-volt battery, you must remove the 4 screws on the bottom

of the LPB-1. Once the screws are removed, you can take off the bottom

plate and change the battery. Please do not touch the circuit board while the

bottom plate is off or you may damage a component.

Produktspezifikationen