Extron MGP 641 xi 5K Bedienungsanleitung
Extron
Nicht kategorisiert
MGP 641 xi 5K
Lies die bedienungsanleitung für Extron MGP 641 xi 5K (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Extron MGP 641 xi 5K oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
MGP 641 xi 5K Series • Setup Guide
IMPORTANT NOTE:
Go to www.extron.com for the complete MGP 641 xi 5K Series user guide, installation instructions, and
specications before connecting the product to the power source.
The MGP 641 xi 5K and MGP 641 xi 5K SDI are multi-window video signal processors that display multiple video sources on a
single screen in picture-in-picture or picture-by-picture format. Both models have four HDMI inputs, one HDMI background input,
one HDMI output, and one buered DTP3 output. In addition, the MGP 641 xi 5K SDI model has four 12G-SDI inputs that are
congurable to be used instead of the HDMI input. Each input is dedicated to one window.
The MGP 641 xi 5K Series feature dedicated connectivity for each of the four windows, fully customizable window layouts, HDCP
1.4 and 2.3 support, logo and background image support, logo keying, and ultra-high resolution support up to 5120 x 2880 at
30 Hz. The MGP 641 xi 5K Series can be controlled and congured using the front panel controls, Simple Instruction Set™
(SIS™) commands, the internal web page, and the Videowall Conguration Software (VCS). The VCS program is available at
www.extron.com. For information on using VCS, see the VCS Help File, also on the Extron website.
About this Guide
This guide provides instructions for an experienced installer to install and congure the MGP 641 xi 5K Series processors.
In this guide, the terms “MGP 641 xi 5K Series” and “MGP” are used interchangeably to refer to both products in the
MGP 641 xi 5K Series. For full installation, conguration, and operation details, see the MGP 641 xi Series User Guide, available at
www.extron.com.
Rear Panel Features and Connections
100-240V
~
1.5A MAX
50-60Hz
MGP 641 xi
INPUTS
1
HDMI
4
HDMI
1A
HDMI
HDMI
3
HDMI
2
HDMI
BACKGROUND
INPUT
OUTPUTS (DTP3/XTP/HDBT) AUDIO OUT
REMOTE
OUT
SIG LINK
1B
DTP3
DTP
DTP
POWER
900mA
DEVICES
1
2
LAN
RESET
LR
Tx Rx G
RS-232
A
A
A
B
B
B
C
C
C
D
D
D
E
E
E
F
F
F
G
G
G
I
I
I
J
J
J
H
H
H
K
K
K
MGP 641 xi 5K
100-240V
~
1.5A MAX
50-60Hz
INPUTS
HDMI HDMI
1A
HDMI
HDMIHDMIHDMI
BACKGROUND
INPUT
OUTPUTS (DTP3/XTP/HDBT) AUDIO OUT
REMOTE
OUT
SIG LINK
1B
DTP3
DTP
DTP
POWER
900mA
DEVICES
1
2
LAN
RESET
LR
Tx Rx G
RS-232
1 SDI 2 SDI 3 SDI 4 SDI
MGP 641 xi SDI
A
A
A
L
L
L
C
C
C
D
D
D
E
E
E
F
F
F
G
G
G
I
I
I
J
J
J
H
H
H
B
B
B
MGP 641 xi 5K SDI
K
K
K
A
AC power connector
E
DTP remote power LEDs
I
Ethernet LAN connector
B
HDMI inputs
F
DTP/XTP/HDBT output (output 1B)
J
ANALOG AUDIO OUT connector
C
HDMI live BACKGROUND INPUT
G
USB device connectors
K
REMOTE RS-232 connector
D
HDMI output (output 1A)
H
RESET button and LED
L
SDI inputs
Figure 1. Rear Panels
1
1
Installation Steps
1. Mount the MGP to a rack using the pre-installed side mounting brackets. The unit has a 1U high, full rack wide enclosure.
Alternatively, attach the four provided rubber feet to the bottom of the MGP and place the unit in the desired location.
2. Connect HDMI sources to the HDMI input connectors (inputs 1 through 4) (see gure1,
B
on the previous page).
MGP 641 xi 5K SDI only: Connect SDI sources to the 12G-SDI input connectors (
L
) (optional).
3. If desired, connect a source to the HDMI live BACKGROUND INPUT connector (
C
). The MGP 641 windows are displayed in
front of this unscaled background video source.
NOTE: You must set the output resolution to match that of the background source, or the background video is not
displayed. The refresh rates do not need to match.
4. Make the following output connections as needed:
• Connect an HDMI display to the HDMI output 1A connector (
D
).
• Connect a DTP or DTP3 endpoint, XTP matrix switcher, or HDBaseT compatible receiver to the buered DTP/XTP/HDBT
output connector 1B (
F
). For cable wiring and recommendations, see the MGP 641 xi Series User Guide available at
www.extron.com.
NOTES:
• RS-232 data can be inserted via Ethernet (see the MGP 641 xi Series User Guide or the VCS Help File).
• For 5K rates, the twisted pair output is active only if connected to a DTP3 receiver. Output resolutions of
4K @ 30 Hz and lower are supported by DTP receivers.
a. Connect a balanced or unbalanced analog audio receiving device (such as a DSP device or an amplier) to the 5-pole captive
screw AUDIO OUT connector (
J
) for 2-Ch audio from the selected input. This connector is congurable via VCS or SIS as
two discrete mono outputs or as one stereo output (see “Audio Wiring” for details).
b. If the MGP is connected to a computer or to a host controller for remote control, do one of the following:
• Connect an RS-232 cable from the host serial port to the Tx, Rx, and G pins (the remaining two pins are not used) of the
5-pole Remote RS-232 rear panel connector (
K
). The default protocol for the RS-232 port is 9600 baud, 1 stop bit, no
parity, and 8 data bits, with no ow control.
• Connect a USB-A to USB-C cable from the host USB-A port to the MGP 641 front panel USB-C CONFIG port (see
gure3,
A
on the next page).
• Connect an RJ-45 network cable from the host Ethernet port to the MGP 641 rear panel LAN port.
5. (Optional) Connect USB devices such as a USB touchpanel, mouse, or ash drive to one or both USB-A 3.0 Devices ports for
use with the annotation function (LinkLicense required), and to save images (see gure1,
G
).
6. Connect power to the MGP by plugging a standard IEC power cord (provided) from a 100 to 240 VAC, 50-60 Hz power source
into the AC power connector (
A
).
7. Apply power to all connected devices.
Audio Wiring
Wire the audio output connectors as shown in gure 2. Use the supplied tie wrap to strap the audio cable to the extended tail of the
connector.
Balanced Audio Output
Tip
Ring
Tip
Ring
Sleeves
Unbalanced Audio Output
Tip
No Ground Here
No Ground Here
Tip
Sleeves
LR
LR
Do not tin the wires
!
Figure 2. Wiring the Audio Output Connectors
2
2
Produktspezifikationen
| Marke: | Extron |
| Kategorie: | Nicht kategorisiert |
| Modell: | MGP 641 xi 5K |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Extron MGP 641 xi 5K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Extron
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
31 Juli 2025
31 Juli 2025
29 Juli 2025
29 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Insta360
- Qoltec
- Satco
- MTD
- Alesis
- Anki
- MyPhone
- Bomann
- JBL
- Amewi
- Extech
- Fuzzix
- Audio Research
- PAG
- Narva
Neueste Bedienungsanleitung für -Kategorien-
2 August 2025
2 August 2025
2 August 2025
2 August 2025
2 August 2025
2 August 2025
2 August 2025
2 August 2025
2 August 2025