Festo DADG-AK-G8-12-20 Bedienungsanleitung

Lies die bedienungsanleitung für Festo DADG-AK-G8-12-20 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 4 Bewertungen. Hast du eine Frage zu Festo DADG-AK-G8-12-20 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

DADG-AK-G8

Connection set

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Assembly instructions

8157118

2021-08

[8157120]

Translation of the original instructions

© 2021 all rights reserved to Festo SE & Co. KG

1

Applicable documents

All available documents for the product

è

www.festo.com/sp.

DocumentProductTable of contents

Operating instructionsMini slide DGST–

Tab. 1:

Applicable documents

2

Safety

2.1Safety instructions

–Only mount the product on components that are in a condition to be safely

operated.

–Observe further applicable documents.

–

Observe tightening torques. Unless otherwise specified, the tolerance is ± 10%.

2.2Intended use

Connection of compressed air lines axially at the back of the mini slide DGST.

3Additional information

–

Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–

Accessories and spare parts

è

www.festo.com/catalogue.

4Product Range Overview

4.1Scope of delivery

1

2

3

Fig.1

1

Air through-guide (1x)

2

O-ring (2x)

3

Socket head screw (2x)

4.2Not in scope of delivery

4

5

6

Fig.2

4

Mini slide (1x)

DGST

5

Fitting (2x)

6

Grease (1x)

e.g. LUB-KB1

5Assembly

1

2

A

6

Fig.3

1.

Lightly grease the O-rings with the grease to facilitate assembly.26

2.

Position the O-rings in the slots [A] of the air through-guide .21

The nominal tightening torques are printed on the air through-guide.

Fig. 4:Example: DADG-AK-G8-16

1

3

4

5

B

Fig.5

DADG-AK-G8DGST-

681012162025

3ScrewM3x5M3x8M4x8M5x12M6x12

[Nm]1.01.21.53.05.0

[B]Air connection

thread

M5G⅛

[Nm]0.73.0

Tab. 2:Screw size, tightening torques and air connection thread

1.

Place the air through-guide on the mini slide .14

2.Fasten the air through-guide with the screws to the mini slide .134

3.

Mount the desired fittings on the air connection threads [B].5

Use of one-way flow control valves GRLA on the air connection threads [B]

One-way flow control valves GRLA may restrict the access [C] to the adjustment of

end position on the DGST.

•

Adjust the external end position before mounting the one-way flow control

valves [D].

•Rotate the one-way flow control valves [D] so the access remains clear.

CD

Fig.6

Produktspezifikationen