Festo DADG-AK-G8-16-40 Bedienungsanleitung

Lies die bedienungsanleitung für Festo DADG-AK-G8-16-40 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 20.5 Bewertungen. Hast du eine Frage zu Festo DADG-AK-G8-16-40 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

DADG-AK-G8

Connection set

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Assembly instructions

8157118

2021-08

[8157120]

Translation of the original instructions

© 2021 all rights reserved to Festo SE & Co. KG

1

Applicable documents

All available documents for the product

è

www.festo.com/sp.

DocumentProductTable of contents

Operating instructionsMini slide DGST–

Tab. 1:

Applicable documents

2

Safety

2.1Safety instructions

–Only mount the product on components that are in a condition to be safely

operated.

–Observe further applicable documents.

–

Observe tightening torques. Unless otherwise specified, the tolerance is ± 10%.

2.2Intended use

Connection of compressed air lines axially at the back of the mini slide DGST.

3Additional information

–

Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–

Accessories and spare parts

è

www.festo.com/catalogue.

4Product Range Overview

4.1Scope of delivery

1

2

3

Fig.1

1

Air through-guide (1x)

2

O-ring (2x)

3

Socket head screw (2x)

4.2Not in scope of delivery

4

5

6

Fig.2

4

Mini slide (1x)

DGST

5

Fitting (2x)

6

Grease (1x)

e.g. LUB-KB1

5Assembly

1

2

A

6

Fig.3

1.

Lightly grease the O-rings with the grease to facilitate assembly.26

2.

Position the O-rings in the slots [A] of the air through-guide .21

The nominal tightening torques are printed on the air through-guide.

Fig. 4:Example: DADG-AK-G8-16

1

3

4

5

B

Fig.5

DADG-AK-G8DGST-

681012162025

3ScrewM3x5M3x8M4x8M5x12M6x12

[Nm]1.01.21.53.05.0

[B]Air connection

thread

M5G⅛

[Nm]0.73.0

Tab. 2:Screw size, tightening torques and air connection thread

1.

Place the air through-guide on the mini slide .14

2.Fasten the air through-guide with the screws to the mini slide .134

3.

Mount the desired fittings on the air connection threads [B].5

Use of one-way flow control valves GRLA on the air connection threads [B]

One-way flow control valves GRLA may restrict the access [C] to the adjustment of

end position on the DGST.

•

Adjust the external end position before mounting the one-way flow control

valves [D].

•Rotate the one-way flow control valves [D] so the access remains clear.

CD

Fig.6

Produktspezifikationen