Festo DARF-Q13-20-1 Bedienungsanleitung

Lies die bedienungsanleitung für Festo DARF-Q13-20-1 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 13 Bewertungen. Hast du eine Frage zu Festo DARF-Q13-20-1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

DARF-Q13-...-1

Push-on flange

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Assembly instructions

8182529

2023-10

[8182531]

8182529

Translation of the original instructions

© 2023 all rights reserved to Festo SE & Co. KG

1

Applicable documents

All available documents for the product

è

www.festo.com/sp.

DocumentProductContent

Operating instructionQuarter turn actuatorDRRS–

Tab. 1:

Applicable documents

2Safety

2.1Safety instructions

–Before working on the product, switch off the compressed air supply and lock it

to prevent it from being switched on again.

2.2

Intended use

The push-on flange attaches the payload to the flange shaft of the

quarter turn actuator DRRS.

2.3Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel have knowledge

and experience in dealing with pneumatic drives and pneumatic axes.

3

Additional information

–Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–Accessories and spare parts

è

www.festo.com/catalogue.

4Product Range Overview

4.1Scope of delivery

1

2

3

Fig. 1:

Scope of delivery

1

Screw (4x)

2

Push-on flange (1x)

3

Centring sleeve (2x)

4.2

Not in scope of delivery

4

Fig. 2:

Not included in the scope of

delivery

4

Quarter turn actuator (1x)

DRRS

5

Assembly

3

4

2

Fig. 3:Positioning centring sleeves

The push-on flange[2] can be mounted with an offset of 90° on the flange shaft of

the quarter turn actuator[4].

1.

Position the centring sleeves[3].

2.

Position the push-on flange[2] centrally.

1

2

Fig. 4:

Mounting push-on flange

•Mount the push-on flange[2] with the screws[1]. Observe tightening torque.

DARF-Q13-...-1-12-16-20-25

ScrewM3x8M4x10M4x12M5x12

Tightening torque[Nm]1.2±20%2.3±20%3.2±25%5.6±25%

Produktspezifikationen