Festo DGSC-6-10-P-P Bedienungsanleitung

Lies die bedienungsanleitung für Festo DGSC-6-10-P-P (3 Seiten) kostenlos online; sie gehört zur Kategorie Bohrmaschine. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 8 Bewertungen. Hast du eine Frage zu Festo DGSC-6-10-P-P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

DGSC-6-10-P-...

Mini-slide

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Operating instructions

8168642

2022-02b

[8168644]

Translation of the original instructions

© 2022 all rights reserved to Festo SE & Co. KG

1Applicable Documents

All available documents for the product

è www.festo.com/sp.

2 Safety

2.1Safety instructions

–Take into account the ambient conditions at the location of use.

–Only use the product in its original condition without unauthorised modifica-

tions.

–Observe the identifications on the product.

–Store the product in a cool, dry environment protected from UV and corrosion.

Keep storage times short.

–Before working on the product, switch off the compressed air supply and lock it

to prevent it from being switched on again.

–Have the product repaired by the Festo repair service only.

–Observe the tightening torques. Unless otherwise specified, the tolerance is

± 20%.

2.2Intended use

The product is intended for the space-saving transport of masses. The product is

approved for slide operating mode.

Fig.1

2.3Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel have skills and

experience in dealing with pneumatic (open-loop) control technology.

3Additional information

–Contact the regional Festo contact if you have technical problems

è www.festo.com.

–Accessories and spare parts è www.festo.com/catalogue.

4Product overview

4.1 Function

The product is a non-rotating single-piston drive with bearing guide.

The slide is moved back and forth by alternate pressurisation of the supply ports.

In the retracted end position, the slide is braked by elastic cushioning rings with

a mechanical fixed stop. In the extended end position, an integrated spring serves

as stroke compensation to avoid high forces on the workpiece during handling.

4.2Product design

DGSC-6-10-PL

1

5

3

6

2

4

7

8

9

Fig. 2:Product design DGSC-6-10-PL

1

Supply port retracting

2

Supply port extending

3

Vacuum port

4

Slide

5

Centre hole 1.5 mm according to

DIN 6325, 2x

6

M5 thread for suction cup with

connection or mounting

7

M3 thread, e.g. for tubing holder

8

M3 thread for mounting, 2x

9

Centre hole 2 mm according to

DIN 6325, 2x

DGSC-6-10-PP

1

9

2

3

4

7

8

5

6

Fig. 3:Product design DGSC-6-10-P-P

1

Centre hole 2 mm according to

DIN 6325

2

Supply port extending

3

Supply port retracting

4

Vacuum port

5

Slide

6

Centre hole 1.5 mm according to

DIN 6325

7

M5 thread for suction cup with

connection or mounting

8

M3 thread, e.g. for tubing holder

9

M3 thread for mounting

5 Transport

NOTICE

Unexpected and unbraked movement of components

•Secure moving components for transport.

Produktspezifikationen