Festo DHAS-GA-B22-S Bedienungsanleitung

Lies die bedienungsanleitung für Festo DHAS-GA-B22-S (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 2 Bewertungen. Hast du eine Frage zu Festo DHAS-GA-B22-S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Translation of the original instructions

1Applicable documents

All available documents for the product www.festo.com/pk.è

DocumentProductContents

InstructionsAdaptive shape gripper DHEFOperating

Tab. 1

2Safety

2.1Safety instructions

–Only assemble the product on components that are in a condition to be safely

operated.

2.2Intended use

Grip the outside of objects in combination with adaptive shape gripper DHEF

(wearing part).

3Product range overview

3.1Scope of delivery

1

Inverting cap (1x)

Fig. 1

3.2Not in scope of delivery

2

Adaptive shape gripper (1x)

DHEF

Fig. 2

4Mounting

4.1Preparation

For replacement:

•Remove old inverting cap from shape gripper instruction manual for theè

adaptive shape gripperDHEF Replacement chapter.è

4.2Replacing inverting cap

Fig. 3 Remove old inverting cap

1.Loosen knurled nut[B].

2.Separate knurled nut[B], bayonet catch[C], threaded bush[D] and inverting

cap[A].

Fig. 4 Assemble inverting cap

•Pull inverting cap over the threaded bush[D].1

Ä

Sealing rim[E] is seated completely over the collar [F].

Fig. 5 Mount bayonet catch

1.Align rotation lock[X] on the bayonet catch[C] with the spring pin[G].

2.Place bayonet catch[C] on the threaded bush[D].

3.Place knurled nut[B] on the threaded bush and screw on to the stop.

Fig. 6 Mount inverting cap

1.Evert inverting cap.1

Ä

The inside of the inverting cap tip[H] is visible.

2.Press the inverting cap tip[H] into the coupling[J] of the piston rod.

Ä

The releasing ring snaps back audibly.

3.Check that O-ring[K] is undamaged and correctly seated in the slot.

Fig. 7 Close bayonet catch

1.Position bayonet catch[C] on the shape gripper.2

2.Turn bayonet catch[C] as shown by the mark (approx.45°).

Ä

Bayonet catch[C] audibly locks.

8104615

DHAS-GA-B22-S

Inverting cap

8104615

2019-02

[8104617]

Instructions| Assembly

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Produktspezifikationen