Festo NECL-S-L12W5-C2-Q10 Bedienungsanleitung
Festo
Nicht kategorisiert
NECL-S-L12W5-C2-Q10
Lies die bedienungsanleitung für Festo NECL-S-L12W5-C2-Q10 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 10 Bewertungen. Hast du eine Frage zu Festo NECL-S-L12W5-C2-Q10 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1

Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
NECL-L1 -C2-Q10 2W5 / NECL-S-L12 -C2-Q10W5
Power supply socket - angled - PIN
male female
enclosed sealing Ø 8 - 10,5mm
Ø 10,5 - 13mm
AWG 14 without wire-end ferrule
Cross-sectional area max. 1.50 mm² with ferrule
max. 2.50 mm² without ferrule
AWG 16 with wire-end ferrule
Cable Assemblies and Fittings for Industrial
Control and Signal Distribution
Electrical connection 1 M12-L coded, 4 pins + FE
Rated voltage 63 V
Certificates C UL us – Recognized (OL) UL2238- E474609
Technical information
All available documents for the product - www.festo.com/sp.
Assembly instruction
3 Scale drawing and tecnical information
2 Assembly instruction
1 Applicable documents
8177386
202 -211
[8 ]177388
© 2022 all rights reserved to Festo SE & Co. KG
1. Clamp out screws until bores for single wires
are completely free.
2. Push sleeve, the suitable seal, and the
pressing screw onto the cable part by part.
3. Cut off cable coating.
4. Strip single cores and twist single wires.
5. Insert single wires into the holes and tighten
clamping screws (0,4 m). N
6. Slide angled sleeve to the contact insert
(if necessary, pull on the cable), press and
screw with it.
Pay attention to the position of the coding
to the cable outlet.
Adjustable in 72° steps
7. Push seal into the angled sleeve as far as it
will go, if necessary, press in with the plat side
of the screwdriver blade.
8. Screw pressing screw
It is possible to turn and fix the contact carrier
in 5 different 72° positions
Contact arrangement (plug-in side)
Produktspezifikationen
Marke: | Festo |
Kategorie: | Nicht kategorisiert |
Modell: | NECL-S-L12W5-C2-Q10 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Festo NECL-S-L12W5-C2-Q10 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Festo
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- MGL Avionics
- Nemef
- OSO
- Speed-Link
- SELF Electronics
- Wiha
- Röhm
- IDENTsmart
- Giardino
- Elite Screens
- ELMEKO
- SMART Technologies
- Comar
- ESUN
- Lian Li
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025