Fiilex P360S Bedienungsanleitung


Lies die bedienungsanleitung für Fiilex P360S (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Fiilex P360S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Safety Instructions
Mode Selection
User Guide
Parts Diagram
• DO NOT look into the light source. Be cautious of the high-intensity beam.
• DO NOT disassemble P360S. This will void the warranty.
• DO NOT install P360S in damp or wet locations.
• DO NOT cover/block the fixture’s air vents.
• Mount the P360S with a safety cable. (A safety cable is not included.)
• Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.
P360S
201105A1
1. 4-leaf Barndoor
2. Barndoor Slot
3. Accressory Lock
4. Side Vents
5. Yoke Knobs
6. Accessory Lock Release
7. CCT/HUE Knob
8. Light Control Input Jack
9. Yoke
10. Light Stand Adapter
11. OLED Display
12. Rear Vents
13. Intensity / DMX Knob
14. Light Control Output Jack
15. DC Power Input Jack
16. ON/OFF Button
235 4 111
13
12
6
7
9
8
10
14
15
16
Intensity
CCT
HUE (Magenta/Green)
DMX Control
Turn the Intensity Knob (13) to adjust brightness.
Turn the CCT Knob (7) to adjust color temperature.
Double click the HUE Knob (7) to adjust HUE value.
Double click the DMX Knob (13) to set DMX address (Range: 1 - 510).
1689 Regatta Blvd. Richmond, CA 94804 | (510) 620-5155 | fiilex@fiilex.com www.fiilex.com


Produktspezifikationen

Marke: Fiilex
Kategorie: Nicht kategorisiert
Modell: P360S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fiilex P360S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten