GeoVision GV-EL124S Bedienungsanleitung


Lies die bedienungsanleitung für GeoVision GV-EL124S (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu GeoVision GV-EL124S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
GV-EL124S Electric Strike
Featured with a built-in door status sensor, the GV-EL124S is a fail-secure electric strike, but
it is field convertible from fail secure to fail safe. It can be mounted either right or left
reversibly on the doorjamb, providing remote release of a locked door.
Packing List
1. GV-EL124S electric strike x 1
3. Clip nut x 2
4. Lock washer x 2
5. Extension plate x 2
6. Clip x 2
7. Varistor x 1
8. M4 screw x 2
9. #10-32 screw x 2
10. #8-32 flat-head screw x 2
June 3, 2015
1
Installation
1. Prepare the doorjamb per drawing.
Figure 1
2. Install the mounting brackets to the doorjamb by using the #8-32 x 1/2 flat-head screws
and the pressed metal nuts (Figure 2). Do not tighten yet.
June 3, 2015
2
3.
Spacers are provided to ensure the final assembly of faceplate into the doorjamb. Add
one of spacers between the doorjamb and the mounting bracket when faceplate extends
beyond the doorjamb. When the faceplate sets inside the jamb, spacers must be added
between the mounting bracket and the tip bracket. Make sure the clearance hole in the
spacer aligns with the hole in the mounting bracket.
Figure 2
4. Connect the wires from the low voltage side of the transformer to the black wires of the
electric strike.
June 3, 2015
3
Figure 3


Produktspezifikationen

Marke: GeoVision
Kategorie: Nicht kategorisiert
Modell: GV-EL124S

Brauchst du Hilfe?

Wenn Sie Hilfe mit GeoVision GV-EL124S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten