GeoVision GV-IPSS400 Bedienungsanleitung


Lies die bedienungsanleitung für GeoVision GV-IPSS400 (17 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu GeoVision GV-IPSS400 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/17
GeoVision Inc. 1 1/26/2024
GV-IP Speaker Users Guide
This document describes how to add and control GV-IP Speaker with GV-Control Center and
GV-VMS. And how to locate the speaker and update its firmware using GV-IP Speaker Setting
Kits.
1. Compatible Software ...................................................................................................................... 1
2. Adding to GV-Control Center ......................................................................................................... 2
2.1 Searching for a Speaker .......................................................................................................... 2
2.2 Manually Adding a Speaker ..................................................................................................... 3
2.3 Associating a Speaker with a Camera .................................................................................... 4
2.4 Speaker Controls ..................................................................................................................... 5
3. Adding to GV-VMS .......................................................................................................................... 7
3.1 Searching for a Speaker .......................................................................................................... 7
3.2 Manually Adding a Speaker ..................................................................................................... 8
3.2 Associating a Speaker with a Camera .................................................................................... 9
3.3 Speaker Controls ..................................................................................................................... 9
4. GV-IP Speaker Setting Kits ...........................................................................................................11
4.1 Changing the IP Address ....................................................................................................... 14
4.2 Updating the Firmware .......................................................................................................... 15
1. Compatible Software
GV-Control Center V4.2.0 or later
GV-VMS V17.4.7 / V18.3.2, patch files required
GeoVision Inc. 2 1/26/2024
2. Adding to GV-Control Center
Add a speaker to GV-Control Center and assign the speaker to a channel.
2.1 Searching for a Speaker
To use the auto search function, the speaker must be installed on the same LAN as
GV-Control Center.
1. On the Host List, click the Add button
> Add Host > Search Host.
2. In the Search Host dialog box, select the discovered speaker.
3. You are promoted to enter ID and Password. By default, the ID is admin and the
Password is admin123. Click OK.
4. You can add multiple IP speakers by entering their respective ID and Password.
5. Click Add Selected Hosts. The speaker is added to the Host List.
Note: To change the default ID and Password, you need to install the GV-IP Speaker
Setting Kits, and access Setting > ONVIFParam. See 4. GV-IP Speaker Setting Kits.


Produktspezifikationen

Marke: GeoVision
Kategorie: Nicht kategorisiert
Modell: GV-IPSS400

Brauchst du Hilfe?

Wenn Sie Hilfe mit GeoVision GV-IPSS400 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten