Golden Lighting Monroe 7041-SF Bedienungsanleitung

Lies die bedienungsanleitung für Golden Lighting Monroe 7041-SF (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 5 Bewertungen. Hast du eine Frage zu Golden Lighting Monroe 7041-SF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Assembly Instructions: 7041-3/SF(Monroe)

IMPORTANT:

•ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

•SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

•USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

For Customer Service, please

contact the place of purchase.

House Wires

Fixture Wires

Hot

How to Identify the Fixture’s Wires

HotNeutralGround

Smooth

Ribbed

Bare Metal,

Green, or

Green Inner

Thread

Black

White

Black Inner

Thread

White Inner

Thread

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important notes above.

Shut off the power at the circuit breaker and completely remove the old

xturefromtheceiling,includingtheoldmountingstrap.

1.Mountingstrap(B)containsseveralpairsofthreadedholesandmay

havetwoofmountingscrews(D)attached.Ifso,youmayneedtotighten

hexnuts(C)thatholdthescrewsinplace.Ifmountingstrap(B)doesnot

havemountingscrews(A)attached,pleasendthescrewsandhexnuts

youremovedfromcanopy(S)andattachtothemountingstrapusinghex

nuts (C).

2.Placemountingstrap(B)uptoyourjunctionbox.Placecanopy(S)over

themountingstrapliningupmountingscrews(D)withtheholesincanopy

(S).Securemountingstrap(B)tothejunctionboxwithmountingscrews(A)

andascrewdriver.Tightenthescrewssecurely.

3.Oneofconnectorrods(N)hasthexture’swiresinside.Hookconnector

rods(N)totheframeatloops(Q)andthenpullthexturewiresuntiltaut.

Attach the top of connector rods (N) to canopy (S) at loops (R).

CONNECTING THE WIRES

4.Haveanassistantsupportthextureweightwhilecompletingthewiring.

Cutawayexcesswire.Attachthexture’swirestothepowersupplywires

fromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite

(orribbed);groundtoground(greenorcopper).Twisttheendsofthewire

pairstogether,thentwistonawireconnector.Makesurealltwistsarein

thesamedirection.Ifthereisnogroundwire(greenorcopper)fromthe

junctionbox,locategroundscrew(E)onmountingstrap(B)andwrapthe

xturegroundwirearoundthegreengroundscrew(E).Useascrewdriver

tosecuregroundscrew(E)ontothemountingbracket.Tuckallwiresneatly

intothejunctionbox.

Please note that the xture may be hung as a

pendant or a semi-ushmount, please decide

how you would like the xture to be installed

and refer to the related instructions.

FINISHING THE INSTALLATION

5.Raisecanopy(S)totheceiling.Positionmountingscrews(A)sothattheyprotrudethroughtheopeningsofcanopy(S).

6.Securecanopy(S)tomountingstrap(B)withdecorativenuts(F).

7.Slideglassshades(P)oversockets(M)andsecureinplacewithsocketcovers(O).

8.

Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended

wattage.

Yourinstallationiscomplete.Turnonthepowerandtestthexture.

FLUSH INSTALLATION

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

Please note that mounting

strap (B) is used in this

installation option. In this

conguration, canopy

(S) attaches directly to

mounting strap (B). do not

use top loop (L - please

ip the page and review

the diagram for more

information).

Q

N

M

O

P

R

F

D

C

B

A

E

S

Produktspezifikationen