HawkEye DepthTrax 2B Bedienungsanleitung
HawkEye
Fischfinder
DepthTrax 2B
Lies die bedienungsanleitung für HawkEye DepthTrax 2B (12 Seiten) kostenlos online; sie gehört zur Kategorie Fischfinder. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu HawkEye DepthTrax 2B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
w w w . h a w k e y e e l e c t r o n i c s . c o m
This manual covers the installation and operation DepthTrax® 2B depth the
finder display Refer to the instructions supplied with the transducer for .
transducer testing and installation. Additional resources are available at
support.norcrossmarine.com. To ensure safety and many years of trouble-free
operation of your product, please read this manual carefully before using this
product.
SAFETY INFORMATION:
• Periodically wipe the face with a dry cloth. Do not use abrasives or solvents on
this device.
• Only qualified personnel should perform repairs or servicing not covered in this
manual.
• The LCD used in the product is made of glass. Therefore, it can break when the
product is dropped or impacted.
• Keep this product away from heat sources such as radiators, heaters, stoves and
other heat generating sources. Do not store in extreme temperatures above 150°
F (65° C).
• Shade the LCD during storage. Do not expose LCD to direct sunlight for
extended periods of time.
NOTES, NOTICES, AND CAUTIONS
WARNING: Indicates a potential for property damage, personal injury or
death.
IMPORTANT: Indicates potential damage to the device and tells you how to
avoid it.
NOTICE: Indicates important information that helps you make better use of
the device and tells you how to correct a performance problem .
INFORMATION: Indicates resources to obtain the proper information to help
you make the most of your device.
I
NFORMATION
:
Read this manual completely before attempting to use or install your
device. Vis
it our Customer Service Center on our website for
advanced troubleshooting and technical support.
W
ARNING
:
This depth sounder should not be used as a navigational aid to prevent
grounding, boat damage, or personal injury. Always operate the boat
at slow speeds in unfamiliar water, or if you suspect shallow water or
submerged objects.
Model No.
DEPTHTRAX
2B BOAT
MOUNT
DEPTH
FINDER
DISPLAY
I O NSTALLATION AND OPERATION INSTRUCTI NS
w w w . h a w k e y e e l e c t r o n i c s . c o m
PARTS SUPPLIED IN PACKAGING
The following parts should be included with the display:
• Digital Depth Sounder Display
• White and Black Faces and Bezels (optional on some models, see
package for details)
• Thick Dash Extension Rod (optional on some models, see package for
details)
• Flush Mount Bracket and Hardware
• Display Power Harness and Waterproof Fuse Holder Attached to the Unit
N
OTICE
:
Refer to the manual supplied with the transducer for
transducer parts list.
If any items are missing or damaged, please contact our customer service
department.
SELECTING THE PROPER TRANSDUCER INSTALLATION
If you think that the included transducer is not suitable for your installation, return
to the place of purchase and exchange it for the correct transducer. You can
also visit our Customer Service Center at www.hawkeyelectronics.com to contact
us or to complete a transducer exchange request to exchange the transducer for
one that is specialized for your vessel. You may also email us at
support@norcrossmarine.com
to inquire about exchanging the transducer.
INSTALLING THE DISPLAY
Tools & Supplies Required for Installation
• Electric Drill
• 2” Hole Saw
• Wire Connectors Suitable for Connecting the Power Wire to Your Vessel
• Wire Cutting/Crimping Tool
• Marine Sealant/Caulk
STEP 1
Installing the Display
1. Find a location on e boat that will allow clear viewing of the display. Keep th
in mind that the wires for the transducer and power must reach the mounting
location.
w w w . h a w k e y e e l e c t r o n i c s . c o m
2. After finding the right location, mark a 2 inch hole. - (If your boat has a pre-cut
hole in the dash panel, simply remove the hole plug and proceed to Step 5.)
I : MPORTANT
Check behind the desired cutting area for wires, switches, etc. that
may be damaged during cutting. If these obstructions are present,
use masking tape to hold them out of the way during cutting.
3. Cut out the 2 ch hole using the 2” hole saw.-in
4. Seal any exposed wood with a marine
sealant.
5. Insert the display from the front of the panel,
feed the wires through the bracket and install
the bracket and locking nut from the rear of
the panel. Make sure that the face of the
display is rotated upright and aligned to your
satisfaction for easy viewing from the
vessel’s helm.
N
OTICE
:
The display can also be surface mounted using the
Adjustable Surface Mount Bracket ( - - )P/N: ACC DF 1000 .
Please visit our website or contact us
by phone for
purchase information. You must attach the extension
rod to the mounting stud on the back of the display housing before inserting
the display into the Surface Mount Bracket.
STEP 2
Installing the Face and Bezel
1. Place the face e display making (B) over th
sure to line up the cut outs on the face with
the notches on the display.
2. While holding the bezel , place it o(A) ver
the display and turn clockwise until the
bezel locks into place.
N
OTICE
:
Gold and Chrome Bezels can be purchased on our website to match
your factory dash or give your depth finder a custom look.
Produktspezifikationen
| Marke: | HawkEye |
| Kategorie: | Fischfinder |
| Modell: | DepthTrax 2B |
Brauchst du Hilfe?
Wenn Sie Hilfe mit HawkEye DepthTrax 2B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fischfinder HawkEye
7 Juli 2025
7 Juli 2025
7 Juli 2025
18 Juni 2025
Bedienungsanleitung Fischfinder
Neueste Bedienungsanleitung für -Kategorien-
8 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
3 Juni 2025
3 Juni 2025
16 September 2024
6 September 2024
1 September 2024
22 August 2024