HawkEye DT1H Bedienungsanleitung


Lies die bedienungsanleitung für HawkEye DT1H (1 Seiten) kostenlos online; sie gehört zur Kategorie Fischfinder. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu HawkEye DT1H oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
DT1H Getting Dash Lines When In Use
You may be experiencing the diffusion of the sonar signal in many directions resulting in
signal weakening through Refraction or Backscatter, primarily due to the material properties
of the areas.
Backscatter: The deflection of acoustic signals in a scattering process through an angle
greater than 90 degrees. Backscatter is the term commonly used to describe the return of
energy from the seabed to the receiver in an active sonar.
medium into another, where its wave velocity is different.
Refraction is a type of ray bending that will affect acoustic returns for proper sonar imaging.
This occurs when sonar pulses encounter thermal zones, silt, salinity changes. Under these
conditions the beam can be refracted sharply to the seafloor severely limiting range. If you
are experiencing one of these conditions, first verify that the sonar is working by placing
your ear up to the sensor and listening for the tick. If you hear the ticking sound, you may
have to discontinue use under these conditions.


Produktspezifikationen

Marke: HawkEye
Kategorie: Fischfinder
Modell: DT1H

Brauchst du Hilfe?

Wenn Sie Hilfe mit HawkEye DT1H benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten