Heat Seal PC-1318 Bedienungsanleitung
Heat Seal
Nicht kategorisiert
PC-1318
Lies die bedienungsanleitung für Heat Seal PC-1318 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Heat Seal PC-1318 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
Revised 2017
READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING EQUIPMENT
OPERATING & SERVICE PARTS MANUAL
PIZZA CAPPER PC- 1318
*Pizza Capper shown with optional
Model 83 Film Dispenser
2
Revised 2017
CAPPING THE PIZZA
Install the appropriate platform for the size of pizza being
wrapped, the 5” disk is for pizzas up to 13” and the 11”
disk is for pizzas up to 18”.
Plug the electrical cord into a standard 110 volt grounded
outlet.
Turn the 12 Hour Timer (2) light will indicate that the
power is on. To set the timer, turn the dial past 2 and
then to the setting you want to leave the wrapper on (1 to
12 hours).
Allow approximately ten minutes for pizza wrapper to
heat to sealing temperature.
Place pizza on a cardboard disc, then place pizza
centered on the platform (1).
Cover pizza with shrink film (3) The pizza film should be
about double the size of the pizza diameter for sufficient
coverage.
Gently tuck the film edges under the cardboard (4) with
your fingers or a tool. Allow the film to shrink for up to
thirty seconds (this time varies depending on the
thickness of the film being used and the temperature set
on the thermostat).
Remove the wrapped pizza from the platform with the
pizza fork (5).
Allow wrapper to completely cool before handling or
cleaning.
DO NOT HANDLE OR TOUCH SURFACES UNTIL
THE UNIT HAS HAD ENOUGH TIME TO COOL.
BE CAREFUL WHEN TUCKING EDGES
OR REMOVING PIZZA FROM PLATFORM,
THE WRAPPER AND FILM CAN BE HOT.
1
2
3
4
5
3
Revised 2017
CLEANING & MAINTENAN CE
TO CLEAN THE PIZZA C APPER
When cleaning or maintaining the PC-1318, make sure to let the machine cool completely and remove power from the unit.
DO NOT submerge or wash down the unit.
The PC-1318 comes with a removable stainless steel crumb tray (1). When the Pizza Capper has cooled down, pull out the
crumb tray and wash or wipe down.
The stainless steel Pizza Capper fork (2) can be washed or wiped down.
The platform and round grate (3) can be removed and washed or wiped down.
The outer and inner rings can also be removed by loosening the three thumb knobs (4) on the sides and the back of the
Pizza Capper.
1
4
3
2
Produktspezifikationen
| Marke: | Heat Seal |
| Kategorie: | Nicht kategorisiert |
| Modell: | PC-1318 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Heat Seal PC-1318 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Heat Seal
22 August 2025
Bedienungsanleitung Nicht kategorisiert
- Tripp Lite
- Lansinoh
- Redrock Micro
- ChamSys
- RéVive
- Beaba
- LiftMaster
- SEADA
- Texas
- Enviroswim
- Respironics
- SKS
- American International
- Durex
- Nite Ize
Neueste Bedienungsanleitung für -Kategorien-
22 August 2025
22 August 2025
22 August 2025
22 August 2025
22 August 2025
22 August 2025
22 August 2025
22 August 2025
22 August 2025
22 August 2025