Heatit Z-TRM6 Bedienungsanleitung

Lies die bedienungsanleitung für Heatit Z-TRM6 (12 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 14 Bewertungen. Hast du eine Frage zu Heatit Z-TRM6 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1. INTRODUCTION

Heatit Z-TRM6 is an electronic thermostat designed for

electrical heating and water based heating control. The

thermostat can be controlled through your Z-Wave network, or

via the buttons on the front of the thermostat. The thermostat

has a user friendly interface.

Heatit Z-TRM6 has 3 modes; Heat - Cool and Eco.

The thermostat fits in standard European junction boxes and

may be used with most System 55 frames. It has a sturdy metal

frame for secure fastening in the junction box. The thermostat

has one built-in room temperature sensor. Two additional

external temperature sensors may also be connected.

Heatit Z-TRM6 has active power metering, and it gives you the

real time information about the power consumption. It also

allows you to set the power metering value manually in case

of connection with a contactor.

The product has implemented ZeroX™ technology. This

technology makes sure the relay switches at 0V when turning

on and o. With this technology the thermostat will have a

much longer lifetime.

The thermostat can be set up with multiple associations and

can be used as a master thermostat. It can control up to 10

thermostats and 10 external relays e.g wall plugs.

The thermostat can withstand a load of max 16A/3600W at

230VAC. We recommend a contactor for loads above 13A.

2. STATEMENT REGARDING PRODUCTS FROM MULTIPLE

MANUFACTURERS

Please read this before installation

This device may be used with all devices certified with the

Z-Wave Plus™ certificate and should be compatible with

such devices produced by any manufacturer. Every primary

controller is dierent depending on the manufacturer, their

target audience and intended use/application. Please review

the functionalities implemented by the primary controller you

intend to use with our Z-Wave Plus certified device to ensure

that it provides the necessary controls to take full advantage of

our product’s capabilities.

3. BEHAVIOR WITHIN THE Z-WAVE NETWORK

This device may be operated within any Z-Wave™ network

with Z-Wave-certified devices from other manufacturers. All

non-battery-operated nodes within the network will act as

repeaters regardless of manufacturer to increase the reliability

of the network. On delivery, the device does not belong to any

Z-Wave network. The device needs to be added to an existing

network to communicate with the other devices within it.

Devices may also be removed from a network. The add/

remove processes are initiated by the primary controller of the

Z-Wave network.

PRODUCT

DOCUMENTS

HEATIT

Z-TRM6

Installers manual

Firmware versionDocument version

FW 1.0Ver C

Article no.Document date

54 305 66

54 305 67

54 305 68

15.11.2024

Org. doc. date 01.07.2023

White RAL 9003White RAL 9010

54 305 6654 305 67

TABLE OF CONTENTS

1. Introduction

2. Statement regarding

products from multiple

manufacturers

3. Behavior within the

Z-Wave network

4. Installation disclaimer

5. Quick Start

6. Connections

7. Installation

8. Add/Remove

9. Factory Reset

10. Startup

11.Principles of regulation

12. Local settings menu

13.Display menu structure

14. Temperature shown in

display

15.Standby and main screen

16. KWh value in menu

17.Size of load

18. Choice of sensor

19. Selecting sensor value

20. Calibration

21. Brightness

22. Display on/o

23. Display icons

24. Child lock

25. Open window detection

26. Error codes

27.Safety features

28.QR-Code Placement (DSK)

29. Security

30.Node Information Frame

31. Associations

32. Association Groups

33. Configuration Parameters

34. Command Classes

35. Supported Command

Classes

36. Controlled command

classes

37.Thermostat dimensions

38. Thermostat controls

39.Placement in junction box

40 Chart - display menu

Product info

Black matt

54 305 68

Produktspezifikationen