Hudson Valley Southold 3938-AGB Bedienungsanleitung
Hudson Valley Beleuchtung Southold 3938-AGB
Lies die bedienungsanleitung für Hudson Valley Southold 3938-AGB (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8 Bewertungen. Hast du eine Frage zu Hudson Valley Southold 3938-AGB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2

FIXTURE INSTALLATION
1.Attach the CROSSBAR (1) onto the junction box using the MOUNTING SCREWS (2). This fixture is designed to
be mounted on standard round or octagon junction box. The junction box must be securely mounted to the
structure of the building.
2.Open the end link on the CHAIN (8) and attach to the loop on the FIXTURE ASSEMBLY (10). Hang the
FIXTURE ASSEMBLY (10) on the CHAIN (9) at your desired height, and remove excess CHAIN.
3.Feed the wire through the CHAIN (9) , SCREW COLLAR (8), CANOPY (7), SCREW COLLAR LOOP (6),
NIPPLE (5), and CROSSBAR (1), and screw the NIPPLE (5) onto the CROSSBAR (1).
4.Open the top link on the CHAIN (9), and Hang the FIXTURE ASSEMBLY (10) to the SCREW COLLAR LOOP
(6).
5.Cut off excess wire, and strip the insulation off the end of the leads.
6.Attach the Ground wire (Green) to the ground inside the junction box (Generally green or bar copper wire) or
the GROUND SCREW (3) on the MOUNTING PLATE (1). NEVER CONNECT GROUND WIRE TO "HOT"
WIRE! FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
7.Connect the white fixture lead to the neutral (Generally white) wire in the outlet box. Fasten the wires together
with an approved fastener (WIRE NUT) (4). Starting 1" below the fastener, tightly wrap the connection with
electrical tape so that the connections seals the end of the fastener. MAKE SURE THERE ARE NO EXPOSED
WIRE OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT CIRCUIT!
8.Connect the black fixture leads to the hot (Generally black) wire in the junction box. Fasten the joined wires
same as previous step. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW THIS
COULD RESULT IN SERIOUS INJURY OR DEATH!
6.Screw the BULB (11) up into the SOCKET of the fixture.THE3936 FIXTURE IS RATED FOR 60 WATT LAMP.
THE3938 FIXTURE IS RATED FOR 75 WATT LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
7.Screw the GLASS (12) up into the FIXTURE ASSEMBLY (10).
8.Restore power to the outlet at the breaker or fuse box.
SOUTHOLD
3936, 3938
INSTALLATION INSTRUCTIONS
www.hvlgroup.com
Questions? We're here to help!
Contact us at [email protected]
WARNING/CAUTION
·DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS
COMPLETELY BEFORE STARTING INSTALLATION.
·TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL
APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND
MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED
FACTORY TRAINED TECHNICIAN.
·CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS
AFTER USE.
·REMOVE THE FIXTURE, PARTS AND PARTS BAG(S) FROM THE CARTON. BEFORE DISCARDING THE
CARTON, DOUBLE CHECK TO MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR
TO INSTALLATION FOR ANY DAMAGE TO THE FIXTURE.
·DIMMING: THE FIXTURE CAN BE CONTROLLED BY A WALL DIMMING DEVICE. ONLY USE
TRIAC/ELECTRONIC DIMMER. MAKE SURE THE CARTON IS MARKED FOR USE WITH LED COMPACT
FLUORESCENT-INCANDESCENT LIGHT SOURCE ONLY. THESE CAN BE PROVIDED BY YOUR LOCAL
ELECTRICAL DISTRIBUTOR, HOME CENTER, OR HARDWARE STORE.
·PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS
1
2
3
4
5
6
7
8
9
10
12
ITEMDESCRIPTIONPART NUMBER
1
MOUNTING PLATE
HDW-003936
2
MOUNTING SCREWHDW-003936
3
GROUND SCREWHDW-003936
4
WIRE NUTHDW-003936
5
1/4 NIPPLEHDW-003936
6
SCREW COLLAR LOOP
HDW-003936
7
CANOPYCPY-003936
8
SCREW COLLARHDW-003936
9CHAIN
CHN-003931
10
FIXTURE ASSEMBLYFAS-003936, 3938
11
BULB
NOT INCLUDED
12GLASS
GLS-003931, 3938
11
Produktspezifikationen
| Marke: | Hudson Valley |
| Kategorie: | Beleuchtung |
| Modell: | Southold 3938-AGB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hudson Valley Southold 3938-AGB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Hudson Valley
1 Februar 2026
27 Januar 2026
27 Januar 2026
27 Januar 2026
27 Januar 2026
26 Januar 2026
28 Juli 2025
28 Juli 2025
28 Juli 2025
Bedienungsanleitung Beleuchtung
Neueste Bedienungsanleitung für -Kategorien-
1 Februar 2026
1 Februar 2026
1 Februar 2026
1 Februar 2026
1 Februar 2026
1 Februar 2026
1 Februar 2026
1 Februar 2026
1 Februar 2026
1 Februar 2026