Icom IC-7100 Bedienungsanleitung
Icom
Nicht kategorisiert
IC-7100
Lies die bedienungsanleitung für Icom IC-7100 (387 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Icom IC-7100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/387
FULL MANUAL
i7100
20 CONTROL COMMAND
15 VOICE TX FUNCTION
14 VOICE MEMORY FUNCTION
13 USING AN SD CARD
12 SCAN OPERATION
11 MEMORY OPERATION
10 GPS/GPS-A OPERATION
9 D-STAR OPERATION <ADVANCED>
8 D-STAR OPERATION <BASIC>
7 D-STAR INTRODUCTION
6 FUNCTIONS FOR TRANSMIT
5 FUNCTIONS FOR RECEIVE
4 RECEIVE AND TRANSMIT
3 BASIC OPERATION
2 INSTALLATION AND CONNECTIONS
1 PANEL DESCRIPTION
16 ANTENNA TUNER OPERATION
17 SET MODE
18 DATA COMMUNICATION
19 MAINTENANCE
21 SPECIFICATIONS AND OPTIONS
INTRODUCTION
HF/VHF/UHF ALL MODE TRANSCEIVER
INDEX
i
3
BASIC OPERATION
3-13
Previous view
Setting frequency (Continued)
Band edge warning beep D
You can hear a beep tone when you tune into or out
of an amateur band’s frequency range. A regular beep
sounds when you tune into a range, and an lower tone
error beep sounds when you tune out of a range.
Push q
SET
(C) to enter the Set mode.
Touch the “Band Edge Beep” item of the “Function” w
Set mode.
Function >
Band Edge Beep
• If the specifi ed item is not displayed, touch [Y] or [Z](D)
one or more times to select the page.
Touch the desired option to e select the desired band
edge warning beep setting, or to turn OFF the func-
tion.
• OFF: Band edge beep is OFF.
• ON (Default): When you tune into or out of the default
amateur band’s frequency range, a beep
sounds. (default)
• ON (User): When you tune into or out of a user pro-
grammed amateur band’s frequency range,
a beep sounds.
• ON (User) & TX Limit:
When you tune into or out of a user pro-
grammed amateur band’s frequency range,
a beep sounds. Also transmission is inhib-
ited outside the programmed range.
• If desired, touch the item for 1 second to open the Default
set window, then select the “Default” to reset to the de-
fault setting.
Push r
SET
(C) to exit the Set mode.
If the “” item is set to “0,” the Band edge
beep does not sound. The beep output level can be
set in the “Beep Level” item of the “Function” Set
mode. (p. 17-18)
About the user band edge frequencies
When “ON (User)” or “ON (User) & TX Limit” is selected
in the “Band Edge Beep” item, a total of 30 band edge
frequencies can be programmed in the “User Band
Edge” item. See the next page for details.
If “OFF” or “ON (Default)” is selected, the “User Band
Edge” item does not appear in the “Function” Set
mode.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D:
Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Touch
“Function”
Push
SET
Touch “Band
Edge Beep”
veBeep Le l
INTRODUCTION
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.
Adobe and Adobe Acrobat Reader are registered trademark of Adobe Systems Incorporated.
All other products or brands are registered trademarks or trademarks of their respective holders.
About this Full Manual (PDF format)
This Full Manual describes the details of the IC-7100 features. This PDF formatted manual provides you with conve-
nient functions, as follows.
(p. 17-18)
Moves to the page, if clicked.
If the “” item is set to “0,” the
Band
veBeep Le l
Shows a term description
When the mouse cursor is moved over
a term which is highlighted in yellow, the
description of the term is displayed.
Previous view
Move to the previously read page.
Click
Previous view
at the left top on an
each page, to move back to the previ-
ously read page.
The screen
shots at the
right column,
correspond to
the operating
instructions
and procedures
shows both set-
ting and operat-
ing example.
The location of the keys used in the described
steps in the left column are illustrated.
The location of the keys used in the
described steps are illustrated.
Example: Push
SET
(C).
NOTE: Below page is used only as an example to describe these advanced instructions.
Previous view
Produktspezifikationen
| Marke: | Icom |
| Kategorie: | Nicht kategorisiert |
| Modell: | IC-7100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Icom IC-7100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Icom
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Aerial
- The Box
- Iadea
- EA Elektro Automatik
- Brockhaus HEUER
- Bushnell
- Aeris
- Alba
- Boneco
- Macally
- Wabeco
- Millecroquettes
- Reloop
- Cabstone
- Traulsen
Neueste Bedienungsanleitung für -Kategorien-
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025