Icom IP110H Bedienungsanleitung

Lies die bedienungsanleitung für Icom IP110H (7 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 50 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 6 Bewertungen. Hast du eine Frage zu Icom IP110H oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

–– 1

Thank you for choosing this Icom product. READ

ALL INSTRUCTIONS carefully and completely

before using this product.

INSTRUCTION MANUAL

PROGRAMMING SOFTWARE

CS-IP110H

The CS-IP110H is an application software to setup the IP110H from your PC.

To use the software, a computer system and some items described in “System requirements” are required.

LThe instructions are based on using Microsoft Windows 10.

•Operating System (OS)

Microsoft Windows

11 (64bit)

Microsoft Windows 10 (32/64bit)

LExcept for Windows on ARM.

•USB port

A USB 1.1, 2.0, or 3.0 port

LIcom is not responsible for problems using a PC with

an OS other than one of the above installed.

•Cables

The USB cable supplied with the transceiver

or

OPC-478UC or OPC-478UC-1 programmingcable

+OPC-1655 programmingadaptercable

System requirements (As of September 2024)

NOTE for the OPC-478UC :programmingcable

•The OPC-478UC is not usable with Windows 11.

•Conrm your OPC-478UC has a “B” on its

label. Only the cables with a “B” are usable with

Windows 10.

Operation notes

•The contents of this sheet, the software associated

with the CS-IP110H, and the appearance of the

CS-IP110H are all subject to change without notice.

•The displays, indications, or operations may differ

slightly, depending on your system settings, type of

OS, and its service pack level.

Procedure outline

To setup from a PC, rst follow the steps described below.

Step 1 Preparations

Conrm the system requirements in these instructions.

Step 2 CS-IP110H installation

Install the CS-IP110H following these instructions.

Step 3 USB driver installation

Install the USB driver following these instructions and the optional programming cable’s installation guide.

Step 4 Connection

Connect the transceiver and a PC following these instructions, and then turn ON the transceiver.

Produktspezifikationen