Ikan PT4700-TK Bedienungsanleitung


Lies die bedienungsanleitung für Ikan PT4700-TK (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8 Bewertungen. Hast du eine Frage zu Ikan PT4700-TK oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
PT4500 / PT4700
Quick Start Guide
High Bright Beam Splitter Teleprompter
Whats Included
1 x Teleprompter Base
1 x Bracket with Glass
1 x Teleprompter Hood with Boot
1 x Monitor
1 x AC Adapter with Cord
1 x PrompterPro Software
1 x Counterweight Set (2 x 2.5 lbs)
2 x D-Ring ¼-20” Screws
2 x Hex Keys
3 x Different Height Risers
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
1
2
-
2
4
V
H
D
M
I
V
G
A
AV
Assembly Steps
Step 1
Remove the monitor mounts from the teleprompter base using the included larger 4mm hex key to loosen from the 15mm rods.
Step 2
Attach the monitor mounts on the back of the monitor’s VESA compatible threads using the 4 included screws and provided 2mm hex key.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
Step 3
After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket.
Make sure the 15mm rods go through both set of monitor mounts.
Step 4
While sliding the teleprompter bracket into the slot of the teleprompter base pull on the red knob to allow the bracket to fully slide in.


Produktspezifikationen

Marke: Ikan
Kategorie: Nicht kategorisiert
Modell: PT4700-TK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ikan PT4700-TK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten