JUNG 834.28 G Bedienungsanleitung
JUNG
Nicht kategorisiert
834.28 G
Lies die bedienungsanleitung für JUNG 834.28 G (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu JUNG 834.28 G oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
Key switches
21.11.20241 / 40024006800
Key switches
Surface-mounted aluminium housings
Ref.-no.: 804.28 G, 806.28 G, 833.18 G, 834.28 G
Operating instructions
1 Safety instructions
Electrical devices may only be installed and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow the instructions in full.
These instructions are an integral part of the product, and must remain with the end customer.
2 Device components
Fig. 1: Device components
(1) Housing
(2) Insert
(3) Prole half cylinder
(4) Locking plate (see accessories)
(5) Centre plate
3 Function
Intended use
- for prole half cylinder with approx. 40 mm overall length (DIN 18252), e.g. art. no.: 28, 28 G1
Designs
Blind reversing switch, 2-pole (2 motors)
804.28 G
Blind reversing push-button, 2-pole (2 motors)
834.28 G
Push-button (2-way), 1-pole
833.18 G
Universal-o 2-way switch, 2-pole
806.28 G
4
1
32 55
GB
Key switches
21.11.20242 / 40024006800
4 Information for electrically skilled persons
Mounting and electrical connection
DANGER
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power and cover live parts in the area!
Connecting surface-mounted housing
• Feed the cable through the opening in the housing.
For this, use the included sealing gaskets.
• Connect the PE conductor in the housing.
• Connect the key switch acc. to the connection diagram. (g. 5 to g. 7)
Adjusting the cam on the prole half cylinder
180°
0°
300°
240°
210°
330°
30°
60°
90°
120°
150°
270°
Fig. 2 and 3: Adjusting the cam on the prole half cylinder
Example:
- Adjustable cam (6) on a prole half cylinder with 12 positions (0° to 330°)
- Fork (7) of a blind switch in the Stop switching state, for switching states see chapter operation
• Turn the key to the 0° position and remove it.
• Set the cam so that it is either located inside the fork or engages with the fork from the outside after the locking
cylinder has been mounted.
For this, use a screwdriver to press down on the two locking pins (8) and turn the cam into position. Only one of
the two locking pins can be pressed down at a time.
- Cam inside the fork:
The key can only be removed in the Stop or O switching state.
- Cam on the outside of the fork:
The key can also be removed in the Up/Down or On switching state.
- With locking plate only: Consider protection against dismounting, see chapter dismounting.
Installing the prole half cylinder
See gure 1
• Fasten the locking cylinder (3) to the centre plate (5) using the included screw.
iIf other locking cylinders are used, these may only have an opening for keys on one side. Otherwise IP44 is not
possible.
76
8 8
Key switches
21.11.20243 / 40024006800
Dismounting
Protection against dismounting due to locking plate:
120°
60°
30°
0°
90°270°
240°
Fig. 4: Protection against dismounting due to locking plate
If the cam is in the 0°, 30°, 60°, 90°, 120°, 240° or 270° position on the outside of the fork, the centre plate is secured
against unauthorised dismounting.
Dismounting of the centre plate without a key is not possible in this case.
5 Operation
Important:
The key can only be inserted and removed in the 0° position.
• Turn the key in the locking cylinder to the left or right to the following switching states.
Blind switches and push-buttons
The motors connected to the respective terminals run forward or backward depending on the switch position.
Depending on the design, 1 or 2 blind motors can be connected.
Up Motor runs forward.
Stop Motor is switched o.
Down Motor runs backward.
1-way switches and push-buttons
The devices connected to the respective terminals are switched on or o according to the switch position.
| On
0 O
Produktspezifikationen
| Marke: | JUNG |
| Kategorie: | Nicht kategorisiert |
| Modell: | 834.28 G |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JUNG 834.28 G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert JUNG
9 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Humax
- NWS
- Sparco
- Lifan
- Massoth
- KeepOut
- Tandberg Data
- L.R.Baggs
- Botex
- Electrify
- ACE
- Deutz
- IStarUSA
- Ibm
- ID-Tech
Neueste Bedienungsanleitung für -Kategorien-
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025