Klein Tools KTB500 Bedienungsanleitung


Lies die bedienungsanleitung für Klein Tools KTB500 (16 Seiten) kostenlos online; sie gehört zur Kategorie power bank. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Klein Tools KTB500 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/16
INSTRUCTION MANUAL
ENGLISH
FRANÇAIS p. 11
ESPAÑOL pg. 6
Portable Power Station
QUIET, LITHIUM-ION POWERED 505WH (46.8AH / 10.8V) BATTERY CAPACITY
FLEXIBLE POWER WITH 4 USB PORTS (INCLUDING 2 USB-C), 2 AC OUTLETS
DIGITAL LCD SCREEN DISPLAYS REAL TIME PERFORMANCE DATA
KTB500
GENERAL SPECIFICATIONS
The Klein Tools KTB500 is a portable power station with the ability to supply 500W of pure sine wave AC power via the two on-board AC outlets. Additionally, the power station is able to
support USB quick charging via two on-board USB-C ports (one of which is Power Delivery (PD) capable), two USB-A ports, and a 12V car port. Use the supplied AC adapter to charge the
KTB500. Overall storage capacity is 505Wh of energy.
Capacity: 505Wh (46.8Ah / 10.8V)
Cell Type: 18650
Cell Chemistry: Li-Ion
8mm Input: 13-30V, 3.5A, 105W maximum
AC Output: 120V each outlet, 500W shared / 1000W peak
DC Output: 120W (12V/10A)
USB Output : USB-A USB-C USB-C PD:(total output 90W) : 2 x 12W (5V/2.4A), : 1 x 15W (5V/3A), 1 x 60W (5V-20V/3A)
Operating / Storage Maximum Altitude: 6562 ft. (2000m)
Operating / Storage Maximum Humidity: <75% non-condensing
Operating Temp: ° ° ° °14 to 104 F (-10 to 40 C)
Charging Temp: ° ° ° °32 to 104 F (0 to 40 C)
Storage Temp: ° ° ° °-4 to 113 F (-20 to 45 C)
Dimensions: 11.8" × 7.5" × 7.3" (30.0 × 19.1 × 18.5 cm)
Weight: 13.9 lbs (6.3 kg)
Life Expectancy: 500 cycles to 80% capacity typical (depending on use and care)
Standards:
FCC, UN38.3, DOE/CEC, NRCAN
Charging Time (Supplied AC Adapter): Full charge 8 to 10 hours
Charging Time (105W Input Max): Full charge 7 hours
Charge Time (Supplied Car Charger Adapter): Full charge 12 hours
Storage: Charge every 3 months (fully charge before storage)
Transportation: This lithium-ion battery is regulated as a hazardous material (dangerous goods) by the U.S. Department of Transportation (DOT) and other transport authorities
and has been tested in accordance with the UN38.3 lithium battery testing requirements. The Watt-hour rating is 505 Wh. If shipped international by air, the battery must be
packaged and transported in accordance with the IATA Dangerous Goods Regulations. Packing Instruction 965, Section IA. All package labeling requirements must be met and
relevant shipping documents must be completed. Shipments by vessel (ocean) and motor vehicle must comply with the applicable dangerous goods regulations for those modes
of transport. Keep ALL original packaging and shipping materials for future use.
Call customer service for replacement packaging if original packaging is lost or damaged.
Specifications subject to change.
ENGLISH
WARNINGS
To ensure safe operation and service of the power station, follow these instructions. Failure to observe these warnings can result in severe injury or death.
Do NOT use portable battery in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
Use of a power supply, charger, or cable not recommended or sold by portable battery manufacturer may result in a risk of fire or injury to persons.
Do NOT use portable battery or AC wall charger if it is damaged or has been modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire,
explosion, or risk of injury.
Do NOT subject to vibration, impacts, or drops. Secure the unit during transport. The housing may not show signs of damage, but internal components may have been
compromised. It is advisable to replace the unit if any such severe events occur.
Do NOT expose portable battery to moisture, rain, or snow.
Keep away from high voltage electrical fields.
Do NOT attempt to repair portable battery or AC wall charger. There are no user-serviceable components inside.
Risk of fire and burns, do not open, crush, heat above 140 F (60 C) or incinerate. Follow all instructions.° °
NOT intended for use with plug types or adapters not listed on the product label.
Do NOT handle unit with wet hands.
Do NOT place the unit on its side or upside down while in use or in storage.
If rust, odor, overheating, or other abnormal circumstance are observed, stop using and contact Klein Tools customer service.
COMPLIANCE
FCC & IC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s
authority to operate the equipment.
IC NOTICE TO CANADIAN USERS
This device complies with industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.
This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus
complies with Canadian ICES-003.
3
16
FEATURE DETAILS
NOTE: No user-serviceable
parts inside.
5
8
11
17
13
1
2
3
14
6
7
BATTERY FEATURES
1. 10.Handle DISPLAY Button
2. 11.USB Output ON/OFF Button INFO Button
3. 12.Car Port Output On/Off Button AC Outlets (120V / 500W)
4. 13.Car Port Output (12V/10A) Air Intake Vent w/ Fan
5. 14.AC Charging Input (8mm) AC Outlet ON/OFF Button
6. 15.USB-A Ports (5V / 2.4A) AC Wall Charger
7. 16.USB-C Ports (5V/3A to 60W PD) Air Exhaust Vent
8. 17.UNITS Button Klein Tools Accessory Mount
9.
LCD Screen
SYMBOLS ON BATTERY
Warning or Caution
Risk of Electrical Shock
Read Instructions
Conforms with BCS regulations of
California Energy Commission
Double insulated Recyclable
LCD FEATURES
A. Hot / Cold Indicator F. Low Input Voltage Indicator
B. G.Fan Time Until Full / Empty
C.
Battery Malfunction Indicator Output StatsH.
D. I.Input Stats Overload Condition Indicator
E. Battery Level Indicator
SYMBOLS ON LCD
LOW
Low Source Voltage. This will result in very
limited charge, or none at all. Recommended
to only use supplied wall charger.
See OVERLOAD CONDITION in OPERATING
INSTRUCTIONS section of this manual
HOT
The battery temperature is higher than
rated operating temperature, the unit may
not function, or provide limited output
capability during this time. See GENERAL
SPECIFICATIONS for operating temperature
COLD
The battery temperature is less than
rated operating temperature, the unit may
not function, or provide limited output
capability during this time. See GENERAL
SPECIFICATIONS for operating temperature
Fan: The fan icon illuminates when the fan
is operating. This occurs during high load
situations for increased cooling. The fan icon
may flash during overload conditions.
Battery Malfunction: The battery malfunction
icon with flash when the power station is
no longer able to charge beyond 40% of
its original capacity. If the icon remains
illuminated without flashing, the KTB500 has
had an unrecoverable failure.
DO NOT ATTEMPT TO SERVICE
Contact Klein Tools Customer Service Directly.
Visit: www.kleintools.com/warranty
Call: 1-800-553-4676
E G HF
A C D
I
12
15
9
SYMBOLS ON WALL CHARGER
Warning or Caution
Risk of Electrical Shock
Read Instructions
Indoor Use Only
Double Insulated
Efficiency Rating
This product meets
applicable UL standards
This product meets
applicable NOM standards
WEEE – Electronic
Equipment Disposal
4
10
B


Produktspezifikationen

Marke: Klein Tools
Kategorie: power bank
Modell: KTB500

Brauchst du Hilfe?

Wenn Sie Hilfe mit Klein Tools KTB500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten