Kramer CL-8P-SUB Bedienungsanleitung
Kramer
Lautsprecher
CL-8P-SUB
Lies die bedienungsanleitung für Kramer CL-8P-SUB (4 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 2 Bewertungen. Hast du eine Frage zu Kramer CL-8P-SUB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
CL SUB-8P- Quick Start
P/N:
2900- 301850QS
REV:
1
Scan to go to website
CL- -SUB Start 8P Quick Guide
This guide helps you install and use your CL-8P-SUB for the first time.
Go to http://www.kramerav.com/downloads/CL 8P- -SUB to download the latest user manual and check
if firmware upgrades are available.
Step 1: Check what’s in the box
1 CL SUB- -8P 8” Ceiling Speaker
2 magnetic girls (1 white & 1 black)
1 pin 4- pluggable Euroblock
connector, 28-12AWG
1 C ring + 2 bolts (mounting rails not -
included)
1 UL-compliant cable passthrough
(metallic)
1 Silicon cable passthrough
Zip tie for securing the speaker cable
1 Cut-out template
1 Quick start guide
Step 2: -8P- Get to know your CL SUB
# ction Feature Fun
1
Speaker
Speakers body
2
Grill
Speaker’s grill
3
Mounting clamps (dog ears)
To be tightened against the back of the ceiling surface to hold the speaker in place
4
Transformer tap selector
For selecting between 8Ω low-impedance modes and 70V/100V high-impedance modes
5
Terminal connector
4-pin pluggable Euroblock connector, 28-12AWG for connecting the speaker cables
6
Cable tie points
Cable anchor points for strain relief
7
Grill securing hook
Hook for securing the magnetic grill
8
Cable passthrough
Passthrough hole for speaker cable
9
Safety anchor point
Safety anchor points for securing a seismic restraint cable
Step 3: Key Features
• Premium sound with high SPL
• -Low impedance (8Ω) / high-impedance (70V/100V)
• Power ratings: 80 W (rms) continuous / 120 W (rms) peak
• Sensitivity (1W@1m, free field): 84dB SPL
• Maximum SPL (@1m): Continuous: 103dB SPL / Peak: 105dB SPL
• Plenum rated UL2043 certified / - UL1480A certified for indoor installations and
• Industrial design: Black & white bezel less grills included in the box- , removable logo
• Eco-friendly mono- material packaging
Step 4: Achieving the Best Performance
To achieve the best performance:
• Use only good quality speaker cables (we recommend Kramer high-performance low smoke halogen free cables,
BC-2Sxx/LSHF).
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighboring electrical appliances that may adversely influence signal quality
Step 5: Choosing the Best Location
• Plan the location of the speakers based on the designated listening area.
• Ceiling Type Suitability: Ensure the ceiling is appropriate for mounting the speaker weight.
• Obstruction Check: Verify the mounting location is free of obstructions like electrical piping, AC ducts, or water lines.
• Ceiling Clearance: ensure you have sufficient ceiling clearance for installing the speaker.
Step 6: Unpacking
1. Carefully remove the speaker and mounting accessories from the packaging.
2. Inspect all components for damage before proceeding.
3. Dispose of the packaging materials according to regulations.
Step 7: Mounting the Speaker
• Step 1: Mark and Cut the Ceiling Tile
Use the supplied cutting template to mark the speaker hole on the ceiling tile, then carefully cut along the line.
• Step 2: Place the C-Ring and Mounting Rails
Position the C ring above the ceiling tile, aligned with the cutout. Slide the mounting rails into the C- -ring slots, but do
not tighten the screws yet.
• Step 3: Place the Tile into the Ceiling Grid
Place the tile (with the C-ring and mounting rails loosely in place) in the ceiling grid.
• Step 4: Adjust and Secure the Mounting Rails
Slide the mounting rails so they rest securely on the ceiling grid framework. Once in place, fasten them to the C-ring
using the supplied screws.
• Step 5: Insert the Speaker
Insert the speaker into the cutout, making sure it fits properly through the C- . ring
• Step 6: Tighten the Mounting Clamps (Dog Ears)
Gently tighten the mounting clamps so they swing out and secure the speaker to the ceiling tile. Do not overtighten.
• Step 7: Pass the Speaker Cable
Route the speaker cable through the passthrough hole and the supplied grommet.
• Step 8: Connect the Wires
Connect the speaker wires to the front access terminal block, ensuring correct polarity- .
• Step 9: Secure the Cable & passthrough gromet
Use the provided zip tie and cable support ears to secure the cable to the speaker and relieve strain.
• Step : 10 Set the Transformer Tap
Use the selector to set the appropriate power tap for your installation.
• Step : 11 Place the magnetic grill
Connect the safety wire of the magnetic grill to the grill securing hook and place the grill in place
T-channel Grid
Support Ring
Screws
Ceiling Tile
Tile Rails
C-ring
Step 8: Wiring the Speaker
Your passive speaker features both low impedance (8Ω) and high impedance (70V/100V) modes. Understanding the
difference is essential for safe installation and optimal performance.
• Plan the installation setup (low impedance or high impedance), in case of high impedance determine the rated
power of the speaker.
Setting up speaker power handling mode:
Your speaker includes a rotary transformer tap for setting the power handling mode.
• To set the speaker to 8Ω low impedance set the transformer tap so the 2 arrows will point at the 8Ω markings as
shown in the picture:
• To set the speaker to a high impedance mode set the transformer tap to the desired power rating as shown in the
picture. In this example, if the speaker will be connected to a 100V line its power rating will be 80W and if
connected to a 70V line its power rating will 40W.
• Connect the speaker cables to the terminal block and the terminal block to the speaker.
Always power off the amplifier before changing transformer tap settings or connecting the terminal connector to the speaker
.
Always check amplifier compatibility before connecting (impedance setup, power ratings).
Verify that the polarity of the wiring at the amplifier side and at all the speaker is correct, we recommend using color codi
ng: red for + and
black for
-.
Produktspezifikationen
| Marke: | Kramer |
| Kategorie: | Lautsprecher |
| Modell: | CL-8P-SUB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Kramer CL-8P-SUB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Kramer
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
21 August 2024
21 August 2024
21 August 2024
21 August 2024
20 August 2024
Bedienungsanleitung Lautsprecher
- Marmitek
- Coby
- Neff
- MUZEN
- Montarbo
- Albrecht
- Veho
- XXODD
- TOA
- Infinity
- InwallTech
- Hercules
- IFi Audio
- ATC
- DS18
Neueste Bedienungsanleitung für -Kategorien-
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025