Kuzco Aston FM48618-5CCT Bedienungsanleitung

Lies die bedienungsanleitung für Kuzco Aston FM48618-5CCT (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 10 Bewertungen. Hast du eine Frage zu Kuzco Aston FM48618-5CCT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION SHEET

FM48618-5CCT

LED Flush Mount

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

2a.

2b.

2c.

2d.

5a.

1a.

1c.

1d.

1e.

1b.

20230926

START FROM HERE

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Please Note:

• This Kuzco LED fixture comes with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) type of dimmer for dimming application

• 120V input

1. Remove fixture from its original package

2. Separate mounting plate from outer glass (1c) (2a)

and LED module by removing decorative nuts (2b)

(2c)

3. Align mounting plate screws to desired (1d)

orientation, and then attach mounting plate to (1c)

electrical junction box using junction box screws (1a)

provided (1e) in hardware package

4. Make proper electrical connections to “L”, (blackhot

white to “N”, to with wire neutralground“GND”)

nuts (1b) provided in hardware package

5. Align and insert mounting plate screws (1d) through

holes on glass and LED module , secure (2a)(2b)

with decorative nuts (2c)

6. Choose color temperature by using slider (5a)

7. Attach diffuser to LED module by turning (2d)(2b)

clockwise to secure

Produktspezifikationen