Kuzco Cumulus PD80730 Bedienungsanleitung

Lies die bedienungsanleitung für Kuzco Cumulus PD80730 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 9 Bewertungen. Hast du eine Frage zu Kuzco Cumulus PD80730 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

You have now completed the installation of your fixture,

enjoy.

You are now ready to mount the canopy to the (2a)

mounting plate connect all wires correctly G (1c). First

ground to ground, N neutral wire (white to white), L live

wire (black to black) with provided marettes from the (1b)

hardware package. Align the holes on the sides of the

canopy (2a) to the flaps of the mounting plate (1c). Push

the canopy up towards the ceiling and use the screws (2b)

to secure the canopy to the mounting plate.

Remove the fixture from its original packaging. Remove the

mounting plate from within the canopy by remov(1c)(2a)-

ing the screws . Secure the mounting plate to the (2b)(1c)

junction box with the screwsprovided in the (1a) (1d)

hardware package.

INSTALLATION SHEET

PD80730

LED Pendant

START FROM HERE

•

Make sure power is completely off at the fuse box.

•

Have your fixture installed by a qualified licensed electrician

•

Prepare everything in a clear area.

•

Wear gloves at all times during this installation.

•

Read instructions carefully before you start assembly.

•

Keep this instruction sheet for future reference.

Technical Support: 1-877-452-6858

1.

3.

Please Note:

•All Kuzco LED fixtures come with pre-wired LED module(s).

• Unless instructed to do so, please do not touch any part of the LED module(s) as any

unnecessary contact with the module could cause permanent damage.

• For dimming, an ELV (Electronic Low Voltage) type of dimmer is required.

19054 28th Avenue Surrey, BC Canada V3S 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

20160414

2.

Before you mount the canopyto the mounting plate select

the desired length you wish the pendant to hang. To

shorten or lengthen the fixture just push in the canopy

nipple (2c) and push/pull the wire to lengthen or shorten.

Release to the nipple and this will secure the wire in place.

1a.

1b.

1c.

2a.

2c.

4.

1d.

2b.

Produktspezifikationen