Kwikset Powerbolt 250 Bedienungsanleitung

Lies die bedienungsanleitung für Kwikset Powerbolt 250 (24 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 5 Bewertungen. Hast du eine Frage zu Kwikset Powerbolt 250 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

If drilling a new door, use the supplied template and the complete

door drilling instructions available at www.kwikset.com/doorprep.

Consult the deadbolt drilling instructions at

www.kwikset.com/doorprep.

or

backset

the door is either 2-1/8 in (54 mm) or

1-1/2 in (38 mm).

either 2-3/8 or 2-3/4 in ( 60 or 70 mm).

60 or 70 mm

2-3/8 or 2-3/4 in

35 – 44 mm

1-3/8 – 1-3/4 in

the door edge is 1 in (25 mm).

Measure to conrm that the door is

between 1-3/8 and 1-3/4 in (35 mm and

44 mm) thick.

A

B

C

BCD

Is the door edge chiselled?

54 mm

2-1/8 in

38 mm

1-1/2 in

25 mm

1 in

C

door frame

D

Install strike on the door frame.

Make sure the hole in the door frame is drilled a

minimum of 1 in (25 mm) deep.

1

Prepare the door and check dimensions

2

Install the latch and strike

1 / 4

ENGLISH

Installation and User Guide

Required tools

Ruler

HammerWood block

Additional Tools (depending on application)

Kwikset Technical Support | 1-800-327-5625 | www.kwikset.com

A

Is the rectangular shaped hole centered in the

door hole?

Hold the latch in front of the door hole, with the latch

YESNO

No adjustment is required.

Proceed to next step.

Rectangular shaped holeRectangular shaped hole

Rotate latch face as

shown to extend latch.

or

actual size

53648

For Latch /

Strike Bag

(4x)

53648

(2x)

(For Latch/

Strike Bag

)

Latch

Strike

Keys

Exterior Assembly

Adapter

Ring

Mounting

Plate

Parts in the box

For Latch / StrikeFor Lock

Interior Assembly

SmartKey

Tool

TransitionalContemporary

53648

52367

52502

Batteries

Collar

53732-001

Rev 01

9250

Note: Please contact customer service if door

thickness exceeds 1-3/4 in for a thick door kit.

180°

YESNO

Install latch in door with

supplied screws.

Install latch in

door with wood

block and

hammer.

chiseled

not

chiseled

Use a athead screwdriver to remove

latch face. Once removed, grip the

latch with one hand and with the

other hand twist collar o. Install

drive-in collar.

unlocked

IMPORTANT: Make sure the latch bolt is fully

retracted (in the unlocked position).

53648

(2x)

(For Latch/

Strike Bag

)

Make sure

slotted hole is at

bottom of latch.

Make sure

slotted hole is at

bottom of latch.

Ensure collar

snaps into place.

Pull collar to test

for tight t.

Align tabs with

holes in collar.

or

Note: Additional door preparation may be

required for doors with 1-1/2 in (38 mm) holes.

Screwdrivers

Produktspezifikationen