Lark Sound SOUNDBAR L200M Bedienungsanleitung

Lark Sound Soundbar SOUNDBAR L200M

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lark Sound SOUNDBAR L200M (1 Seiten) in der Kategorie Soundbar. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.7 Sternen bewertet

Download PDF

Seite 1/1

- 6 -

PACKAGE CONTENTS

Soundbar (1)

Remote Control(1)

Optical cable(1x4.92ft)

AUX cable(1x2.62ft)

Screw bag(1)

Wall Mount Template Plus Bracket (1 set)

- 7 -

Posi oning the Sound Bar 

Place on a at Surface 

Place the sound bar horizontally on a at surface such as a TV unit or shelves and align it 

centrally with the TV screen. Allow some space between the speaker and the wall. Don’t

place inside a cabinet or an a walled shelf. Follow this guidance for best sound output and

good air ow around the sound bar.

Mount on the wall

WARNING: If you don’t feel condent to correctly and securely wall-mount the sound bar,

seek the assistance of an experienced person of professional.

Insert the two wall-mount screws into the wall, refer to wall moun ng template we 

supplied in package for the distance.

Install the speaker on a ver cal, fast, reinforced area of wall. For plaster walls, it is 

recommended to screw into

wall studs for greater security. For op mum performance, 

allow at least 30mm distance between the sound bar and the TV.

Follow below steps to mount the sound bar on the wall

1. Make 2 holes on the wall with distance same as the wall bracket on the soundbar, refer to

wall moun ng template to make it correct easily.

2. Put the plas c anchors onto the wall and secure the screws to the plas c clip, do 

not

ghten the screws all the way make sure leave some space.

3. Once the screws securely fastened, hang the sound bar over by inser ng the screws onto 

the wall mount bracket.

4. We also provide one set of plus bracket in case you need more distance between wall



on the soundbar and exchange the plus set.

- 8 -

- 9 -

- 10 -

Playing Audio via USB Port



supported).



extension cable connected to the USB port);

3. Select USB mode by short press USB on remote control;

4. The remote control includes USB input mode playback controls.

Op cal Mode





Proceed as follows:













HDMI Mode





using a single HDMI cable.









remote control.

Important Notes:











Speci ca ons  

Model 200M

Technology BT  AUX HDMI ARC) OPTICA USB 

Fre uency Response 60Hz-20KHz

Power Input 100V-240V~50Hz 60Hz

Bluetooth Version Version: 5.0 Range:up to 10m

Bluetooth Fre uency 2402MHz - 2480MHz

Dimensions Soundbar:15.75*2.36*3.54 inch



Issues Problems Solu ons

Sound

No sound from

SoundBar speakers

Connect the audio cable from your soundbar to your TV or other devices. However, you do not need a separate

audio connec on when the Soundbar and TV are connected through HDMI ARC connec on 

On the remote control, select the correct audio input.

Distorted sound or echo lf you play audio from the TV through the soundbar, make sure that the TV is

muted.

Bluetooth

A device cannot connect

with the SoundBar

Restart the soundbar and try pairing again

You have not enabled the bluetooth func on of the device. See the user manual of the device on how to enable 

the func on.

The device is not correctly connected.

The soundbar is already connected with another bluetooth device. Disconnect the connected device,

then try again.

Quality of audio play from a

conne

cted Bluetooth device is

poor.

The bluetooth recep on is poor. Move the device closer to the soundbar, or remove any obstacle between the 

device and the soundbar.

The connected Bluetooth

device connects and

disconnects constantly

The bluetooth recep on is poor. Move the device closer to the soundbar, or remove any obstacle between the 

device and the soundbar.

we will support you in shortest me.

Remark:

Once addi onal informa on needed, please kindly contact support@larksound.com  

-11 -

FCC Compliance

NOTE: This e uipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protec on against harmful interference in a residen al installa on. This   

e uipment generates uses and can radiate radio fre uency energy and, if not installed and  

Thank you for purchasing the home theater L200M Soundbar. Please

read this user manual carefully and keep for future reference.

To reduce the risk of electric shock, do not dismantle the product and do

not expose the apparatus to rain or moisture. No user-serviceable parts

inside.Refer servicing to qualified personnel only

The lightning flash within an equilateral triangle is intended to

alert you to the presence of uninsulated dangerous voltage

within the product’s enclosure that may be of sufficient

magnitude to constitute an electric shock to a person or persons.

This appliance is not intended for use by persons (including children) with

reduced physical sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

1. To prevent possible hearing damage, do not listen at high volume levels

for long time periods or a sudden high volume level.

2. Never use the device unsupervised! Switch off the device whenever you

are not using it, even if not using it only for a short while.

3. The appliance is not intended to be operated by means of an external

timer or separate remote control system.

4. If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified persons in order to avoid a hazard.

5. Before operating this system, check the voltage of this system to see if

it is identical to the voltage of your local power supply.

Important! This symbol alerts you to read and observe

important warnings and instructions on the unit or in this manual.

Warning

Caution:

Notice:

- 1 -

Important Safety Instructions

6. The unit should not be impeded by covering the ventilation opening with

items such as

newspaper, table-cloths, curtains etc. Make sure that there are at least 20

cm of space above and at least 5 cm of space on each side of the unit.

7. The apparatus must not be exposed to dripping or splashing and that

objects filled with liquids, such as vases, must not be placed on the

apparatus.

8. To prevent fire or shock hazard, do not expose this equipment to direct

heat, rain, moisture or dust.

9. Do not locate this unit near any water sources e.g. taps, bathtubs,

washing machines or swimming pools. Ensure that you place the unit on

a dry, stable surface.

10. Do not place this unit close to a strong magnetic field.

11. Do not place the unit on a amplifier or receiver.

12. Do not place this unit in a damp area as the moisture will affect the life

of electric components.

13. Do not attempt to clean the unit with chemical solvents as this might

damage the finish. Wipe with a clean, dry or slightly damp cloth.

14. When removing the power plug from the wall outlet, always pull

directly on the plug, never pull on the cord.

15. Depending on the electromagnetic waves used by a television

broadcast, if a TV is turned on near this unit while it is also on, lines

might appear on the LED TV. Neither this unit nor the TV is malfunctioning.

If you see such lines, keep this unit well away from the TV set.

16. The mains plug is used to disconnect the device, the disconnected

device should remainreadily operable.

1. Read these instructions. Keep these instructions. Follow all instructions.

Heed all warnings.

2. Do not use this apparatus near water.

3. Clean only with dry cloth.

4. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

5. Do not install near any heat sources such as radiators, heaters, stoves, or

other apparatus (including amplifiers) that produce heat.

6. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other.

7. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles or at the point where they exit from the apparatus.

8. Only use attachments/accessories specified by the manufacturer.

9. Unplug this apparatus during lightning storms or when unused for long

periods of time.

- 2 -

Preparation for Use

10. Refer all servicing to qualified service personal. Servicing is required when

the apparatus has been damage in any way, for example, when the

power-supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

11. The DC plug is used to disconnect the device, the disconnected device

should remain readily operable. In order to disconnect the apparatus from the

DC power completely, the DC plug must be removed from the AC outlet

completely.

Unpacking and Set Up

•Remove the Sound bar from the carton and remove all packing material from

the Sound bar. Save the packing material, if possible, in case the Sound bar

ever needs to be serviced or transported. The original carton and packing

material is the only safe way to pack your Sound bar to protect it from damage

in transit.

•Remove any descriptive labels or stickers on the front or top of the cabinet.

Do not remove any labels or stickers from the back or bottom of the cabinet.

•Place your Sound bar on a level surface such as a table, desk or shelf,

convenient to an AC outlet, out of direct sunlight, and away from sources of

excess heat, dirt, dust, moisture, humidity, or vibration.

•Unwind the Line cord connecting the AC adapter and extend it to its full length.

Protect Your Furniture

This model is equipped with non-skid rubber 'feet' to prevent the product from

moving when you operate the controls. These 'feet' are made from non-migrating

rubber material specially formulated to avoid leaving any marks or stains on

your furniture. However certain types of oil based furniture polishes, wood

preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and

leave marks or a rubber residue on the furniture. To prevent any damage to

your furniture we strongly recommend that you purchase small self-adhesive

felt pads, available at hardware stores and home improvement center

everywhere, and apply these pads to the bottom of the rubber 'feet' before you

place the unit.

Power Source

This sound bar is designed to operate on normal AC Power source, it works

only under SMPS 100V-240V 50hz/60Hz. Do not attempt to operate the ～

Sound bar on any other power source. You could cause damage to the

Sound bar that is not covered by your warranty.

- 3 -

Important Notes

• This sound bar was especially developed for LED/LCD/Plasma TV's:

It should not be used in combination with CRTTV's (Cathode Ray Tube TV's) in

order to avoid image interference.

• Safety and operating instruction manual should be retained for future reference.

• The apparatus should not be exposed to dripping, splashing or placed in

a humid atmosphere such as a bathroom.

• Do not install the product in the following areas:

• Places exposed to direct sunlight or close to radiators.

• On top of other stereo equipment that radiate too much heat -Blocking

ventilation or in a dusty area.

• Areas where there is constant vibration.

• Humid or moist places.

• Do not place near candles or other flames.

• Operate the product only as instructed in this manual.

• Before turning on the power for the first time, make sure the sound bar is

plugged to power outlet.

• For safety reasons, do not remove any covers or attempt to gain access to

the inside of the product. Refer any servicing to qualified personnel.

• Do not attempt to remove any screws, or open the casing of the unit; there

are no user serviceable parts inside. Refer all servicing to qualified service

personnel.

- 4 -

1. Standby: short press for power ON, long press for OFF;

2. Input: short press for choosing input mode(HDMI ARC/OPT/AUX/USB/BT);

long press for connect/unconnected device under BT mode;

3. VOL+: master volume up

4. VOL-: master volume down

5. USB

6. AUX IN

7. HDMI(ARC)

8. Optical

Product Diagram

- 5 -

正面

反面

2.0 CH 3D soundbar

SOUNDBAR L200M

USER MANUAL

User Manual(1)

1. Standby mode, short press for power on,

long press for power off.

2. HDMI mode

3. Optical mode

4. VOL+: master volume up

5. BASS-: To decrease the bass.

6. VOL-: master volume down

7. AUX IN mode

8. Play/Pause (Only work under USB & BT

mode of smartphone)

9. Pre button: Previous program (Only work

under USB & BT mode of smart phone)

10. Music EQ mode

11. Standard EQ mode

12. Night EQ mode

13. Dialogue EQ mode

14. Pairing (long press for disconnect

bluetooth device if connecting, or connect

back the last connected device while devices

are disconnecting )

15. Bluetooth mode

16. BASS+: to increase the bass.

17. MUTE: mute/unmute the soundbar

18. USB mode

19. Next button: Next program (Only work

under USB & BT mode of smartphone)

20. Movie EQ mode

21. 3D Sound: select the 3D sound effect.



Use the power components to connect the Soundbar to an electrical

outlet in the following order:

1. Connect the power cord to a wall socket, then the Soundbar will





keyboard or on remote control, then unplug from wall socket.







remote control to switch the input mode



input mode:



Bluetooth mode: Blue



AUX mode: Orange

USB mode: Red







5. When the soundbar in highest volume, you will hear a beep sound if

you keep add volume.

Playing Audio via BT Connec on

1. 1. Turn on sound bar and then short-press BT to switch to BT mode;

2. 





4. The remote control includes BT mode playback controls.

Notes:

Press on remote control to shutdown in pairing mode, and repress to reconnected

to the last connected device.







pairing steps.

AUX mode

1. Connect the sound bar to your PC, tablet, smart phone, TV or other device using 3.5mm

audio cable by short-press AUX on remote control.

2. In this mode, playback can only be controlled on your connected device.

3 15

used in accordance with the instruc ons, may cause harmful interference to radio 

communica ons. However, there is no guarantee that interference will not occur in a 

par cular installa on. If this e uipment does cause harmful interference to radio or 

television recep on, which can be determined by turning the e uipment o and on, the   

user is encouraged to try to correct the interference by one or m

ore of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separaon between the e uipment and receiver.

-Connect the e uipment into an outlet on a circuit di erent from that to which the receiver  

is connected.

-Consult the dealer or an experienced radio TV technician for help

Changes or modi ca ons not expressly approved by the party responsible for compliance  

could void

the user's authority to operate the e uipment.

This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two

condi ons:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that

may cause undesired operaon.

WEEE Compliance

Correct Disposal of This Product Waste Electrical & Electronic E uipment) 

Applicable in countries with separate collec on systems)

This marking on the product, accessories or literature indicates that the product and its

electronic accessories should not be disposed of with other household waste at the end of

their working life. To prevent possible harm to the environment or human h

ealth from

uncontrolled waste disposal, please separate these items from other types of waste and

recycle them responsibly to promote the sustainable reuse of material resources. Household

users should contact either the retailer where they purchased this product, or their local

government o ce, for details of where and how they can take these items for 

environmentally safe recycling. Business use

rs should contact their supplier and check the

terms and condi ons of the purchase contract. This product and its electronic accessories 

should not be mixed with other commercial wastes for disposal.

HDMI, HDMI High - De ni on Mul media Interface, and the HDMI   

ogo are trademarks or registered trademarks of HDMI icensing C 







minimum distance 20cm between the radiator and your body.

Produktspezifikationen

Marke:	Lark Sound
Kategorie:	Soundbar
Modell:	SOUNDBAR L200M

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lark Sound SOUNDBAR L200M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Soundbar Lark Sound

Lark Sound SOUNDBAR L200M Bedienungsanleitung

8 Juni 2025

Bedienungsanleitung Soundbar

Neueste Bedienungsanleitung für -Kategorien-

Ultimea Poseidon D50 Bedienungsanleitung

1 Juni 2025

JBL PSB-2 Bedienungsanleitung

30 Mai 2025

Grundig GSB 910 Bedienungsanleitung

1 Dezember 2024

Kogan KASBD100HA Bedienungsanleitung

30 November 2024

Kogan KADA312WRSA Bedienungsanleitung

26 November 2024

Insignia NS-HTSB20S Bedienungsanleitung

15 Oktober 2024

Harman Kardon Citation Bar Bedienungsanleitung

29 September 2024

Bose Smart Soundbar Bedienungsanleitung

26 September 2024

LG LAS350B Bedienungsanleitung

24 September 2024

Samsung HW-Q810D Bedienungsanleitung

21 September 2024