Lindy NC-60 Bedienungsanleitung
Lies die bedienungsanleitung für Lindy NC-60 (12 Seiten) kostenlos online; sie gehört zur Kategorie Headset. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Lindy NC-60 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
NC-60
ACTIVE NOISE CANCELLING
These headphones have been developed to deliver superb quality Hi-Fi sound without the distraction of annoying
background noise. NC-60 benefits from both a Lindy two year warranty and free lifetime technical support. To
ensure correct use, please read this manual carefully and retain for future use.
Thank you for purchasing these NC-60 Noise Cancelling Headphones.
Product Contents
NC-60 Headphones 3.5mm audio cable, 1.5m 1/4’’ stereo-plug adapter
Dual-plug flight adapter 2 x AAA Batteries Carry case with mesh pouch
40mm high output
drivers with
neodymium magnets
Battery compartment,
remove to install
2 x AAA batteries
Volume control
Selectable active noise
cancellation removes up
to 85% of external noise
Lightweight design
for optimum comfort
Features and Benefits
1
Introduction
The NC-60 has been designed to be used for active noise cancelling and so audio performance has been optimised
for this mode. For your convenience, when the batteries become flat or are removed, the headphones will continue to
operate in passive mode.
Operation
1. Adjust the volume of the NC-60 using the Volume Control (3)
2. Switch on the Noise Cancelling feature by sliding the On/Off Switch (4) to On; the Noise Cancelling Indicator (5) will
illuminate Blue
3. After you turn the Noise Cancelling feature on you may hear a slight hissing noise, this is completely normal and will
reduce after a few seconds and become inaudible during audio playback
4. When using the Noise Cancelling feature, if the battery level becomes low the Noise Cancelling Indicator will become
dim. If you continue to use the Noise Cancelling feature the battery will eventually drain, but the headphones will
continue to operate passively
Noise Cancelling
Battery Installation
1. Push the battery cover cap inward and downward in a single motion to remove the cap
2. Install 2 x AAA batteries (alkaline are recommended) into the battery compartment taking care to match the indicated
battery polarity.
3. Replace the cap, ensuring it is in the correct orientation and that the small plastic lugs on the back are aligned with the
corresponding holes in the earpiece
4. Finally slide the cap upward until it clicks into position
Overview
Left
1. 3.5mm Audio Socket
2. Removable Battery Compartment
Right
3. Volume Control
4. Noise Cancelling On/Off Switch
5. Noise Cancelling Indicator
Left Right
5
4
3
Check the volume level before placing the headphones over your ears
Do not listen to the headphones at high volume for excessive periods as this may damage your hearing
Discontinue use if you experience any discomfort or irritation from using the headphones
These headphones must not be worn whilst driving a motor vehicle
Safety
1
2
2
Produktspezifikationen
| Marke: | Lindy |
| Kategorie: | Headset |
| Modell: | NC-60 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Lindy NC-60 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Headset Lindy
21 August 2024
19 August 2024
18 August 2024
17 August 2024
19 Januar 2024
31 Oktober 2023
Bedienungsanleitung Headset
- Moki
- STEALTH Gaming
- Midland
- Hollyland
- Plantronics
- Mr Handsfree
- Panasonic
- Focal
- Williams Sound
- Behringer
- White Shark
- SBS
- Energy Sistem
- Cooler Master
- Sharkoon
Neueste Bedienungsanleitung für -Kategorien-
18 Juni 2025
17 Juni 2025
15 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025