Master Lock 94DSPT Bedienungsanleitung

Lies die bedienungsanleitung für Master Lock 94DSPT (6 Seiten) kostenlos online; sie gehört zur Kategorie schloss. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet. Hast du eine Frage zu Master Lock 94DSPT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

/ 6 PDF

WARNING!

DO NOTUSE THIS LOCK ON A LOADED GUN!

A

ttempts to use on a loaded gun may result in

an accidental discharge.

A loaded gun must always be regarded as

dangerous. If the lock becomes damaged in any

w

ay do nota

ttempt to use on your firearm – refer

to guarantee information for replacement.

®

Before attempting to use, carefully read all of the following instructions

along with the firearms safety tips.

I

MPORTANT: We do not guarantee that this product will lock all

firearms. It will block access to many guns when properly attached.

S

ome lever action rifles, firearms without trigger guard surrounding the

triggers, guns with extra light or extra wide triggers or guns with trigger

s

hoes or extensions may not be able to be effectively locked with this

gun lock. NO GUN LOCK CAN OFFER COMPLETE PROTECTION AGAINST

THE ACCIDENTAL OR INTENTIONAL MISUSE OF FIREARMS. Keep guns

unloaded and out of children’s reach. Master Lock Company is not

responsible for incidental or consequential damages.

– INSTRUCTIONS FOR USE CONTINUED ON OTHER SIDE –

!

WARNING! 

Do Not Use On A Loaded Gun!

Attempts to use on a loaded gun may 

result in an accidental discharge!

9

4 RESETTABLE

COMBINATIONGUN

LOCK

READ BEFORE USE!

Instructions

for Use

1.To open lock, set dials to

combination (combination is pre-set

to 0-0-0 by factory). With dials set

to combination, move release lever

to open, or up, position. Pull apart

the two sides of the gun lock. MAKE

SURE GUN IS UNLOADED AND NOT

COCKED.

2.Move release lever back down to

locked position and scramble

combination dials. Insert front lock

unit with ratchet post through

trigger guard, behind trigger if

possible.

3.Insert rear unit, with outside edges

of both units matching. Note that

self-adjusting pins usually permit

lock to be installed in more than

one position.

4.After determining best locking

position, press the two units

together. Make certain lock is tight

and cannot be moved after it is

installed. If it can be, press units

tighter together until immovable.



FRONT

UNIT

RATCHET POST

REAR UNIT

2.

4.

3.

1.

Produktspezifikationen