North Light 36-1230 Bedienungsanleitung

Lies die bedienungsanleitung für North Light 36-1230 (154 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 4 Bewertungen. Hast du eine Frage zu North Light 36-1230 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ENGLISH

GREAT BRITAIN • CUSTOMER SERVICE

tel. 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk

Ver. 20150706

Industry Table Lamp

Art.no 18-1242 Model CS-D061 matt black-UK

36-1230 CS-D061 matt black

Please read theentire instruction manual before using theproduct

and then save it for future reference. We reserve theright

for any errors in text or images and any necessary changes

made to technical data. If you have any questions concerning

technical problems please contact our Customer Services.

Safety

Bulb: 220–240 VAC, E14, max 25 W

Caution!

• Intended for indoor use in ambient temperatures up to 25 ºC.

• Unplug thelamp before changing thebulb.

• Thebulb can become very hot during use. Let it cool

completely before changing.

• Place thelamp on aflat, level surface.

Warning symbols

Assembly

Thelight is partly assembled when sold. Themains lead is

already pulled through thearm.

Care and maintenance

• Unplug themains lead before cleaning theproduct.

• Clean theproduct using asoft, moist cloth. Use amild

detergent. Never use solvents or strong, abrasive cleaning

agents. They could damage theproduct.

Disposal

This product should be disposed of in accordance with local

regulations. If you are unsure how to proceed, contact your

local council.

Specifications

Cable length 1.7m

Max bulb wattage 25W, E14 (sold separately)

Input voltage 220–240 V AC, 50 Hz

Max height 80cm

Shade Ø 20.5cm

For indoor use only

Class II luminaire

• Themains lead should be checked regularly. Never use

theproduct if themains lead or plug is damaged.

• If themains lead is damaged, it must only be replaced

by themanufacturer, anauthorised service centre or

aqualified electrician. This is in order to prevent any risk of

fire or electric shock.

The sections of the arm need to be screwed together.

Makesure that the power cable is not crushed.

Thescrew in thejoint of thearm needs to be undone before

thearm can be adjusted. Remember to tighten thescrew

again afterwards.

Note:

There is a screw on the base of the lamp which looks like it

could be used for changing the angle of the lower section of

the lamp arm. The screw is just for decoration and cannot be

undone. The base is fixed and the angle of the lower section of

the lamp arm cannot be altered.

Produktspezifikationen