NUVO 62/1701 Bedienungsanleitung

Lies die bedienungsanleitung für NUVO 62/1701 (4 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 7 Bewertungen. Hast du eine Frage zu NUVO 62/1701 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

WARNING: Risk of Fire or Electric Shock

•Disconnect power before installation or maintenance of

the fixture.

•To avoid damage, falling, electric shock or fire, do not modify the fixture

or replace accessories without confirming with the supplier first.

•Only authorized, qualified personnel should install this fixture and

should follow the owner’s manual. Any improper installation might cause

failure, electric shock, fire or other injury, damage or hazard.

•To prevent fire, this fixture is rated for use in 120VAC.

•0–10V models are 120/277V. See 0–10V wiring diagram.

•T

he product ispurposed for interioruse only,suitable forwet locations.

•Suitable for use with dimmers. Visit www.Satco.com for a list of

compatible dimmers.

•Protect the product against direct contact with water.

•For use in environments where an accumulation of non-conductive

dust on the fixture may be expected.

•Clean with a soft or damp cloth, making sure the power is OFF.

• Assemble the product only with the use of parts provided and the

housing; improper assembly may result in device failing which could

damage the product, personal property or cause injury.

• CAUTION: When handling the fixture, do not apply pressure to the

LEDs. Hold the fixture by the base only.

The circuit is intended for connection to an external Class 2 supply.

Any changes or modifications to this unit not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

WARRANTY: This product is guaranteed for a 5 year warranty. Any

quality issue in normal use within the warranty period, will be repaired or

replaced according to the situation and under the condition specifications

can be provided. Visit www.Satco.com for full warranty details.

CCT SELECTABLE BLINK

LED FLUSH FIXTURES

Satco Products, Inc.

Brentwood, NY 11717

INSTALLATION AND SAFETY INSTRUCTIONS

IMPORTANT: Read before installing xture. Retain for future reference.

© Copyright 2022 Satco Products, Inc. 11/22 v1.5

Wiring Diagrams

BLACK

WHITE

COPPER

LINE

NEUTRAL

GROUND

Fixture

Models: 62-1700, 62-1701, 62-1702, 62-1703, 62-1704, 62-1705, 62-1706, 62-1707, 62-1710,

62-1711, 62-1712, 62-1713, 62-1714, 62-1715, 62-1716, 62-1717, 62-1718, 62-1719, 62-1720,

62-1721, 62-1722, 62-1723, 62-1724, 62-1725, 62-1726, 62-1727, 62-1728, 62-1729

CCT Selectable

2700K/3000K/3500K/4000K/5000K

NOTE: 0-10V wiring for models: 62-1718,

62-1719, 62-1728, 62-1729 (120/277V)

L=BLACK

N = WHITE

G = COPPER

DIM + PURPLE

DIM –PINK

Fixture

Produktspezifikationen