PAC AP4-TY11 Bedienungsanleitung
Lies die bedienungsanleitung für PAC AP4-TY11 (13 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu PAC AP4-TY11 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/13
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 1
Rev: V2
Date:032718
Advanced Amplier Interface
for Toyota / Lexus
AP4-TY11
The AP4-TY11 provides a 6-channel pre-amp output for use with aftermarket audio equipment. Using the full range,
xed level head unit output, in conjunction with data bus messages, the AP4-TY11 delivers a variable 5v RMS pre-
amp output with fading, balance, equalization, and level control capabilities. The module also retains audio from
other vehicle features such as factory navigation prompts, Bluetooth and Voice Activation. An accessory controlled
remote amplier turn on wire is also provided by the AP4-TY11. When used in conjunction with the APA-TOS1 (sold
separately), the module can provide a variable 2-channel ber optic digital audio output (TOSLINK).
Introduction and Features
Important Notes
Wiring Connection Chart
To Aftermarket
Amplifier
Non-FadingRearFront
1(L) 2(R) 4(R) 5(L) 6(R)3(L)
Remote Turn On Output (2A Max)
Mute Input From Navigation
Mute Input From Telematics
To Amp PRO*
B*
A*
C*
*Connections “To Amp PRO”, “A”, “B” and “C”
are discussed in detail starting on page 5 under
“Voice / Nav Audio Connections”.
To Vehicle
Harness
To Radio
Non-Fading
Level Control
Knob
AP4-TY11-HAR
To Radio
1. Only compatible in vehicles equipped with a data bus controlled premium sound system. To verify compatibility in Toyota,
look for a JBL logo on the radio. In Lexus applications, most compatible radios will have a factory subwoofer or center
channel. RX Series Lexus are always amplied regardless if they do or do not have a center channel or subwoofer. Always
check PAC-audio.com for radio specic compatibility notes based on the year, make and model of the vehicle.
2. Voice activation / navigation prompt audio requires the AP4-TY11 harness to be connected for the proper conguration for
the vehicle. See the Vehicle Connections Chart starting on page 2 for details.
3. The factory radio's speed controlled volume, DSP, and surround sound mode are not supported by the AP4 outputs.
4. The factory amplier must remain connected, and in the vehicle after the AmpPRO has been installed.
5. Prior to testing, cycle the ignition off and back on again to properly initilize the AP4-TY11.
6. The AP4-TY11 beep volume and minimum volume levels are set to 0 dB by default. If you are happy with this level in your
particular application, additional adjustment is not required. Please refer to the Setup and Conguration section on page 9
for more details.
7. The remote output is rated at 2A of current. If more current is needed, an external relay must be used.
8. Channels 5 and 6 are non-fading outputs. The output level of channels 5 and 6 can be controlled using the supplied level
control knob.
9. The level control knob must be connected in order to manually adjust the beep volume and minimum volume settings.
10. Due to variations in output levels between various OEM radios and even between radio modes, the AP4-TY11 output
voltage may vary from the selected 5 volt (or 4 volt when DIP switch 2 is down) output.
11. Toyota Safety Connect and Lexus Enform (SOS) can easily be retained. See the Tech Brief "AP4-TY SOS Retention" at
PAC-audio.com for detailed instructions.
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 2
Rev: V2
Date:032718
Advanced Amplier Interface
for Toyota / Lexus
AP4-TY11
Vehicle Connections Chart
The connections chart provides the information necessary to retain the voice prompts and navigation audio along with details
of where to nd the factory amplier, and in some cases, location of the factory navigation module. In vehicles with navigation
and / or a voice button on the steering wheel, locate your vehicle on this chart to determine which cong you will use. If the
vehicle does not have the voice button on the steering wheel and it does not have navigation, this information will not pertain to
the installation.
Use the chart to determine which Conguration to use, and the location of the amplier and navigation module (when
applicable). Under the "Cong Type" column, if it is listed as "A" it is cong type A, "B" is cong type "B" and Cong type C is
listed as the 3 possible versions. "C v1" is cong type C version 1, "C v2" is cong. type C version 2, and "C v3" is cong C
version 3. See the appropriate section covered on pages 5 thru 8 regarding the connections covered in the chart. If there is
an N / A listed for the vehicle, the information in that column does not pertain to your vehicle. The "Nav Input Audio" and "Nav
Output Audio" information describes the wiring and connector found at the navigation module.
Toyota
Model Years Cong Type OEM Amp Location Nav Module Location Nav Input Audio Nav Output Audio
4Runner 2003 - 2005 * C v3 Behind Right Rear Side
Panel in Rear Cargo Area
Over Right Rear Tire Well
In Rear Cargo Area
18 Pin Connector
Pin 1 (+) Light Green
Pin 10 (-) Blue
18 Pin Connector
Pin 2 (+) Light Green
Pin 11 (-) Blue
4Runner
2006 - 2013 A Behind Right Rear Side
Panel in Rear Cargo Area
N / A N / A N / A
Avalon 2005 - 2007 C v3 Under Front Right Seat Left Side of Luggage
Compartment
18 Pin Connector
Pin 1 (+) Gray
Pin 10 (-) Yellow
18 Pin Connector
Pin 2 (+) Pink
Pin 11 (-) Violet
Avalon 2008 - 2010 Non Nav: A
Nav: C v3
Under Front Right Seat Left Side of Luggage
Compartment
18 Pin Connector
Pin 1 (+) Gray
Pin 10 (-) Yellow
18 Pin Connector
Pin 2 (+) Pink
Pin 11 (-) Violet
Avalon 2011 - 2012 A Under Front Right Seat N / A N / A N / A
Avalon 2013 - 2014 B Under Front Left Seat N / A N / A N / A
Camry 2007 - 2011 A Under Front Right Seat N / A N / A N / A
Camry 2012 - 2014 B Under Front Left Seat N / A N / A N / A
Corolla 2005 - 2008 N / A Under Front Right Seat N / A N / A N / A
Corolla 2009 - 2011 A Under Front Right Seat N / A N / A N / A
FJ Cruiser 2011 - 2014 A Behind Right Rear Side
Panel in Rear Cargo Area
N / A N / A N / A
Highlander 2008 - 2010 A Under Front Right Seat N / A N / A N / A
Highlander 2011 - 2013 ** Radio and
Display: B
All Others: A
Under Front Right Seat N / A N / A N / A
Prius 2004 - 2005 C v1 Under Front Right Seat N / A N / A Pin 22 (+) White
Pin 21 (-) Black
Prius 2006- 2009 C v2 Under Front Right Seat N / A N / A Pin 25 (+) Green
Pin 26 (-) Red
Prius 2010 - 2011 A Under Front Right Seat N / A N / A N / A
Prius 2012 - 2015 B Under Front Right Seat N / A N / A N / A
Rav4 2004 - 2006 N / A Behind Right Rear Side
Panel in Rear Cargo Area
N / A N / A N / A
Produktspezifikationen
| Marke: | PAC |
| Kategorie: | Empfänger |
| Modell: | AP4-TY11 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit PAC AP4-TY11 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger PAC
11 Juli 2025
10 Juli 2025
10 Juli 2025
12 August 2024
Bedienungsanleitung Empfänger
- Optoma
- Peavey
- Viscount
- Ibanez
- ACV
- Akai
- DirecTV
- Wet Sounds
- Wavtech
- Engel Axil
- Audiolab
- Polk
- Eventide
- Cloud
- HEOS
Neueste Bedienungsanleitung für -Kategorien-
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025