Poly-Planar FS1 Bedienungsanleitung
Lies die bedienungsanleitung für Poly-Planar FS1 (1 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 11 Bewertungen. Hast du eine Frage zu Poly-Planar FS1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
Floating Speaker User Guide
FS1
1. It is recommended to charge 3 6h before use. Amber light when charging, green -
light when fully charged.
2. To power on: hold down the power button for 3s until the LED light turns on and a
voice prompt announces “Power On”. After the startup is successful, the LED light
will illuminate. These lights may not be highly visible in sunlight, which is why
there is also a voice prompt.
3. Should there be any operational issues, including linking and pairing, press the reset
button. The reset button is located on the round silicone ring on top of speaker
(opposite of handle) marked RST.
4. To power OFF: hold down power button for 3s, until voice prompt indicates
powering off, at which point LED lights should no longer illuminate.
5. While Bluetooth pairing to the FS1, device will display as: Floating Speaker.
6. After the Bluetooth source is connected successfully, the LED light shows the state
of "breathing" (fading in and out).
7. To activate internal Wi Fi of FS1 speaker: Used to connect multiple 1 speakers. -FS
Press " " once on the speaker you wish to add, and a green light will appear on
that speaker while connecting. (Again, may be hard to see in sunlight) After linking,
the LED light on the linked speaker will be in the "breathing" state. Once linked,
speakers will now play together.
8. To disconnect linked speaker(s): 1) press “ ” once on the FS1 you wish to
disconnect, and after 3s speaker should disconnect. At this point, music should have
stopped playing from linked speaker(s).
2) If unsuccessful, power unit OFF or press RST (Reset) button.
9. Once a speaker is linked, the buttons on the linked speaker(s) become inactive and
controls are operated by the main FS1 speaker.
10. When the battery is lower than 20%, you will get a voice prompt announcing low
battery.
11. If the Bluetooth device disconnects or goes out of range for longer than 20 minutes,
the speaker(s) will automatically shut off.
5/12/2022
Produktspezifikationen
| Marke: | Poly-Planar |
| Kategorie: | Lautsprecher |
| Modell: | FS1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Poly-Planar FS1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Poly-Planar
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
18 Dezember 2023
Bedienungsanleitung Lautsprecher
- Busch-Jaeger
- Provision ISR
- F&D
- 2N
- Crunch
- Cygnett
- Victrola
- EasyMaxx
- Xiaomi
- AV:link
- LG
- Exagerate
- Empire
- Apogee
- Zvox
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025