Premier Mounts AST-1321 Bedienungsanleitung
Premier Mounts
Nicht kategorisiert
AST-1321
Lies die bedienungsanleitung für Premier Mounts AST-1321 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 14 Bewertungen. Hast du eine Frage zu Premier Mounts AST-1321 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
AST-1321 Suspension Adapter
Page - 1 - Installation Instructions
9533-011-031-00
AST-1321 INSTALLATION INSTRUCTIONS
Single Stud Installation
1. Secure the ceiling plate to the ceiling structure (see WARNING).
2. Use suitable hardware (commercially available) depending on your installation environment to secure the
two (2) mounting points found on the ceiling plate to the ceiling structure (Figure 1).
3. Refer to ceiling mount or adapter installation instructions to complete the installation.
WARNING: Do not attach equipment over 160 lbs to the AST-1321. The ceiling structure must be capable of
supporting a minimum weight of 320 lbs. If not, the ceiling must be reinforced. Proper
installation procedure by qualied personnel as outlined in the installation instructions must be
adhered to. Failure to do so could result in serious personal injury.
WARNING: Make sure to hold the flat panel display, or projector, securely and remove it from the mount to
make the height adjustment prior to loosening the adjustment screws. Loosen, remove, adjust
then re-tighten the screws. Failure to do so could result in injury and or damage to the display or
projector.
Figure 1. AST-1321 Single Stud Installation
AST-1321 Suspension Adapter
Page - 2 - Installation Instructions
Solid Structure Installation
1. Secure the ceiling plate to the ceiling structure (see WARNING).
2. Use suitable hardware (commercially available) depending on your installation environment to secure the
four (4) mounting points found on the ceiling plate to the ceiling structure (Figure 2).
3. Refer to ceiling mount or adapter installation instructions to complete the installation.
WARNING: Do not attach equipment over 160 lbs to the AST-1321. The ceiling structure must be capable of
supporting a minimum weight of 320 lbs. If not, the ceiling must be reinforced. Proper
installation procedure by qualied personnel as outlined in the installation instructions must be
adhered to. Failure to do so could result in serious personal injury.
WARNING: Make sure to hold the flat panel display, or projector, securely and remove it from the mount to
make the height adjustment prior to loosening the adjustment screws. Loosen, remove, adjust
then re-tighten
Figure 2. AST-1321 Solid Surface Installation
Produktspezifikationen
| Marke: | Premier Mounts |
| Kategorie: | Nicht kategorisiert |
| Modell: | AST-1321 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Premier Mounts AST-1321 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Premier Mounts
5 September 2024
5 September 2024
20 August 2024
20 August 2024
19 August 2024
19 August 2024
18 August 2024
17 August 2024
17 August 2024
17 August 2024
Bedienungsanleitung Nicht kategorisiert
- Vorago
- Feelworld
- Atech Flash Technology
- Bullet
- Akai
- Claypaky
- Maytag
- King Craft
- Bulgin
- ECTIVE
- Cruz
- Starburst
- Bestway
- RADEMACHER
- Calor
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025