Proaim P-TMGC-01 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Proaim P-TMGC-01 (3 Seiten) in der Kategorie Stativ. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 3 Benutzern mit durchschnittlich 4.4 Sternen bewertet
Seite 1/3
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Tablemount Geared Column TMGC(P- -01)
A s s e m b l y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Magnec Crank Lever-
Index Markings
3/8” Screw
(Camera Mounng)
Locking Knob
Grip Clamp
Proaim Tablemount Geared Column
2
Tablemount Geared Column Setup
Aach the table mount Geared Column to
the table through the grip clamp axed to
the geared column.
NOTE: The column comes with a jaw like grip -
clamp that ts on any table, shelf or ladder
with a width of 18 38mm and fastens securely.-
Pull out the magnec Crank Lever and adjust -
the index marking accordingly with the help
of the Crank Lever, as shown in the image.-
Aer adjusng the index marking, stabilize it
at the place where it is required with the
help of a knob.
NOTE: Index marking on the column facilitates
precise height adjustment between 2”- 25”.
Aer aaching the Tablemount Geared
column to the table, secure it properly with
the help of the locking knob from the boom
side.
Loosen the locking knob of the Tablemount
Geared Column.
NOTE: It comes with a crank lever that lets
you adjust the height with exact precision.
Mount the Superball Camera Tripod Ball
Head on Tablemount Geared Column by
matching the threads.
3
Aer mounng the camera (Not Included),
secure it properly using the knob, as shown
in the picture.
Aer mounng the Superball Camera Tripod
Ball Head on the column, rotate it to secure
it properly and then mount the camera
(Not Included) on it.
NOTE: The camera can be rmly aached to
the column by means of a 3/8" screw.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn t cover transportaon costs nor does it ’
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM TABLEMOUNT GEARED COLUMN
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Produktspezifikationen
| Marke: | Proaim |
| Kategorie: | Stativ |
| Modell: | P-TMGC-01 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Proaim P-TMGC-01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Stativ Proaim
9 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
Bedienungsanleitung Stativ
- Stativ On Air
- Stativ DJI
- Stativ Kirk
- Stativ MOVE'N SEE
- Stativ KRUX
- Stativ Celestron
- Stativ Levenhuk
- Stativ 3 Legged Thing
- Stativ Sachtler
- Stativ Square Jellyfish
- Stativ Magnus
- Stativ Kessler
- Stativ Manfrotto
- Stativ Ultimate Support
- Stativ Davis
Neueste Bedienungsanleitung für -Kategorien-
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025