Rane RPS 4 Bedienungsanleitung

Lies die bedienungsanleitung für Rane RPS 4 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 7 Bewertungen. Hast du eine Frage zu Rane RPS 4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

18

Rane MPE Users Guide

equipment rack. With the Rane FVL 22 Remote

Volume Level controller and the RPS 4, continuous

volume and EQ presets can be controlled by a

couple of knobs on a wall plate or in a lectern!

The wiring diagram for a simple two program

selector is shown below. This will toggle between

programs 1 and 2.

The Rane RWS 4is a four position wall mount

switch designed to fit a 75 ohm coax wall plate. It

will supply four program changes to the MPEs using

any 3 conductor cable. Here's an actual size drawing

along with the wiring diagram.

RPS 4 Remote Program Selector

In some applications, it may be desirable to switch

the MPE programs from a remote location, without

the use of a computer or MIDI controller. A simple

switch to change programs can also make operation

a lot easier for the non-technical person who may be

responsible for operating the sound system. The RPS

4 comes to the rescue.

Simply, the RPS 4 converts contact closures to

MIDI program changes. Depending on your require-

ments, the RPS 4 can generate up to 16 program

changes (1-16). These MIDI program change com-

mands can simultaneously change your EQ curve(s)

on your MPE and/or any other MIDI controlled

device in your system. The sound equipment can

then be locked up in a rack somewhere else, possibly

minimizing cable runs and curious fingers. Presets

can be made for different program material, occu-

pancy changes, different mics or placement, music

or speech. The switch can be located away from the

Produktspezifikationen