Rane SM 26B Bedienungsanleitung
Rane
Nicht kategorisiert
SM 26B
Lies die bedienungsanleitung für Rane SM 26B (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Rane SM 26B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4

Manual-1
OPERATORS MANUAL SM 26B
SPLITTER MIXER
SM 26B CONNECTION
When connecting the SM 26B to other components in
your system for the first time, leave the power supply for last.
This gives you a chance to make mistakes and correct them
before damage is done to anything fragile.
As you have no doubt noticed, all Inputs and Outputs on
the SM 26B’s rear panel are ¼" connectors. The Inputs and
Outputs are active balanced on Tip-Ring-Sleeve (TRS) jacks
which allow the flexibility of connecting in either a balanced
or unbalanced fashion. If unbalanced operation is your
preference, the simplest way to accomplish this is through the
use of tip and sleeve ¼" connectors. The ring is not essential
unless balanced operation is required. You should be aware
that if you are running unbalanced and using TRS connectors
with both ring and tip, the ring and sleeve must be shorted
together. Failure to do so on the inputs results in a gain loss of
6 dB.
Balanced operation requires that TRS plugs be used. The
tip is hot (+), the ring is return (–) and the sleeve is ground.
RaneNote 110, “Sound System Interconnection” (included
here) contains some great pictures to aid your interconnect
ventures.
QUICK START
Realizing that in most areas there are laws against reading owners manuals, and that reading them under the blankets at
night with a flashlight makes you feel stupid, we therefore provide this brief, yet informative, description of how to use the
SM 26B just in case your batteries are low and your mother is about to come in the room.
To achieve a quick understanding of the SM 26B, think of it as a six channel mixer with faders and pans only. Or think
of it as a 2-to-6 channel splitter with output level controls and a mix knob (to control how much of which input goes to
which output). If you get that, you may stop here as long as you know how to hook up the power supply.
As a six channel mixer, MONO IN 1 through 6 may be placed on the Right or Left bus or both, in any amount. The
respective LEVEL knobs on the front of the unit serve as the mixer’s faders, the adjacent PAN controls place the channel’s
signal into the stereo field. As an effects mixer or line level expander for a larger mixer, set up the LEVELS and adjust the
PANS. The MASTER OUTPUT LEVEL adjusts the overall level of the mix at the Master Outputs.
As a splitter, place one or both input signals into the LEFT and/or RIGHT Inputs. Select the Input(s) to be placed at
each of the six MONO OUTs by rotating the MIX/PAN control to the proper position. Set the individual CHANNEL
LEVEL controls for proper output level. The MASTER INPUT LEVEL control on the front adjusts both Right and Left
Input signal levels together.
Never connect anthing except an RS 1 or other approved Rane AC power supply to the red thing that looks like a
telephone jack on the rear of the SM 26B. This is an AC input and requires some special attention if you do not have an
operational power supply exactly like the one that was originally packed with your unit. See the full explanation of the
power supply requirements elsewhere in this manual.
WEAR PARTS: This product contains no wear parts.

Manual-2
FRONT PANEL DESCRIPTION
햲 POWER switch: Two guesses ......
햳 POWER indicator: When this yellow LED is lit, the SM 26B is ready to go.
햴 MASTER OUTPUT LEVEL controls the amount of signal at the MIX OUTPUT jacks. It does not affect the level of any
of the six MONO OUTs. This control changes the gain of the output stages. This allows an increase in headroom to elimi-
nate overloading due to excessive combined signal from one or more Inputs. Range of gain is from Off to 0dB (unity). Refer
to the block diagram in the SM 26B Data Sheet and/or schematics.
햵 MONO INPUT LEVEL controls the Level of signal through each particular channel. When fed from the MONO IN jack,
each stage has a gain range from Off to +12 dB minimum, allowing level matching of -10 dBV equipment to +4 dBu gear.
When fed via the LEFT & RIGHT INPUT(s), these CHANNEL LEVEL controls automatically limit to a maximum of
unity gain to accommodate the +12dB available from the Left & Right Input gain stages.
햶 MIX/PAN serves two different functions:
MIX: When used as a SPLITTER, this controls the mix of Left and Right Master Input program to each Channel’s MONO
OUTPUT.
PAN: When used as a MIXER, this control pans the Mono Channel Input between the LEFT and RIGHT MIX OUTPUTS.
햷 MASTER INPUT LEVEL sets the gain of the Left & Right Master Input stages, with a range of Off to +12 dB. In the
splitting mode, this controls the Level of all Mono Channel Outputs at once (i.e., those which do not have a separate input).
Produktspezifikationen
Marke: | Rane |
Kategorie: | Nicht kategorisiert |
Modell: | SM 26B |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rane SM 26B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Rane
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Sicce
- GeoVision
- Rosières
- Tenda
- Texas Instruments
- Tesla
- Sandia Aerospace
- Lexibook
- Avocent
- Ulsonix
- Sanitec
- Phoenix Contact
- Glemm
- C2G
- Trimble
Neueste Bedienungsanleitung für -Kategorien-
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025