Ryobi One+ P4003K Bedienungsanleitung
Ryobi
Nicht kategorisiert
One+ P4003K
Lies die bedienungsanleitung für Ryobi One+ P4003K (36 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Ryobi One+ P4003K oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/36

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ONE+ 18V HYBRID 50 FT.
STANDING DRAIN AUGER
DÉGORGEOIR POUR TUYAUTERIE
AUTONOME DE ONE+ 18 V HYBRIDE
DE 15,2 m (50 pi)
BARRENA DE DRENAJE CON SOPORTE
DE ONE+ 18 V HÍBRIDA DE 50 pies (15,2 m)
P4003
WARNING: To reduce the risk
of injury, the user must read and un-
derstand the operator’s manual before
using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUDES: Drain Auger, Auger Tip,
External Power Supply, Power Supply
Storage Bracket, Operator’s Manual
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings ............................. 2-3
Drain Auger Safety Warnings .............4
Electrical ............................................. 5
Symbols .......................................... 6-7
Features ..............................................7
Assembly ............................................ 7
Operation ...................................... 8-10
Maintenance ..................................... 11
Illustrations ................................. 12-14
Parts Ordering
and Service .........................Back page
INCLUT : Dégorgeoir pour tuyauterie,
bout du furet, alimentation électrique
externe, crochet de rangement de la source
d’alimentation , manuel d’utilisation
TABLE DES MATIÈRES
****************
Avertissements de sécurité générales
relatives aux outils électriques ....... 2-3
Avertissements de sécurité
relatifs dégorgeoir pour tuyauterie ..... 4
Caractéristiques électriques ...............5
Symboles ........................................ 6-7
Caractéristiques .................................7
Assemblage ........................................7
Utilisation ..................................... 8-10
Entretien ...........................................11
Illustrations ................................. 12-14
Commande de pièces
et dépannage ....................Page arrière
INCLUYE: Barrena de drenaje, punta de
la barrena, fuente de alimentación exterior,
soporte de almacenamiento de fuente de
alimentación, manual del operador
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctrica ........... 2-3
Advertencias de seguridad
de barrena de drenaje ...................... 4
Aspectos eléctricos .......................... 5
Símbolos ........................................ 6-7
Características .................................. 7
Armado ............................................. 7
Funcionamiento ........................... 8-10
Mantenimiento ................................ 11
Illustraciones .............................. 12-14
Pedidos de piezas
y servicio .......................Pág. posterior

2 — English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Use this product only with batteries and chargers
listed in tool/appliance/battery pack/charger correla-
tion supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energizing
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long hair.
Loose clothes, jewelry, or long hair can be drawn into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
Produktspezifikationen
Marke: | Ryobi |
Kategorie: | Nicht kategorisiert |
Modell: | One+ P4003K |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ryobi One+ P4003K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Ryobi
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Tempo
- Lockncharge
- Dörr
- Roccat
- Munchkin
- Boori
- Think Tank
- Ciarra
- ProfiCare
- AV:link
- DigitSole
- Lindy
- Sinbo
- Twinkly
- Dormakaba
Neueste Bedienungsanleitung für -Kategorien-
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025