Salter EK6552 Bedienungsanleitung
Salter
Wasserkocher
EK6552
Lies die bedienungsanleitung für Salter EK6552 (2 Seiten) kostenlos online; sie gehört zur Kategorie Wasserkocher. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Salter EK6552 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2

CD041024/MD000000/V1
NOTE: When using the kettle for the first time, a
slight odour may be emitted. This is normal and will
soon subside. Allow for sucient ventilation around
the kettle.
WARNING: The kettle is not suitable for dishwasher
use.
Removing the ‘new kettle’ taste
Fill the kettle to the max. fill mark and boil the water, following
the instructions in the section entitled ‘ ’. If any Using the kettle
slight ‘ ’ taste or odour remains in the boiled water, new kettle
discard this and refill the kettle to three-quarters full. Once boiled,
add two tablespoons of bicarbonate of soda and leave to stand
overnight. Discard the water then re-boil a couple of times to
remove any residue.
Using the kettle
STEP 1: Remove the kettle from the power base.
STEP 2: Press the lid button to open the flip top lid and fill the
kettle to desired water level between the min. fill mark and the
max. fill mark. Close the lid by pressing it down to ensure it is
secure and place the kettle back onto the power base.
STEP 3: Plug in and switch on the kettle at the mains power
supply and flip the power switch to the on position until it clicks;
it will illuminate to indicate that it is switched on.
STEP 4: Once the kettle has boiled, the power switch will
automatically flip back to the o position.
NOTE: The boiling process can be cancelled at any time
by flicking the power switch back to the o position.
Storage
The kettle must be cool, clean and dry before storing in a cool,
dry place.
Never wrap the cord tightly around the kettle; wrap it loosely to
avoid causing damage.
Specifications
Product code: EK6552
Input: 220–240 V ~ 50/60 Hz
Output: 2500–3000 W
User manual
Kettle
8
3
11
4
1
6
7
5
2
10
1. Kettle
2. Power base
3. Power switch
4. Handle
5. Min. fill mark (0.5 L)
6. Max. fill mark (1.7 L)
7. Water fill gauge
8. Flip top lid
9. Lid button
10. Spout
11. Limescale filter
9
Disposal of Waste Batteries and Electrical and Electronic Equipment
This product is labelled with this crossed out wheel bin symbol in accordance with European
Directive 2012/19/EC to indicate that it must not be disposed of with your other household
waste. Due to the presence of hazardous substances, mixtures or components, electrical
and electronic devices that are not subject to selective sorting are potentially dangerous to
the environment and human health. Please check your local city oce or waste disposal
service for the return and recycling of this product.
Manufactured by:
Ultimate Products UK Ltd.,
Victoria Street, Manchester OL9 0DD. . UK
Ultimate Products Europe Ltd.,
19 Baggot Street Lower, Dublin D02 X658. .ROI
MADE IN CHINA.

Please retain instructions for future reference.
SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions
should always be followed.
Check that the voltage indicated on the rating plate
corresponds with that of the local network before
connecting the appliance to the mains power supply.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory
or mental capabilities and knowledge, if they have been
supervised/instructed and understand the hazards involved.
Children shall not play with the appliance.
Children should not perform cleaning or user maintenance,
unless they are older than 8 and supervised.
This appliance is not a toy.
If the power supply cord, plug or any part of the appliance is
malfunctioning or if it has been dropped or damaged, cease
using the product immediately to avoid potential injury.
This appliance contains no user serviceable parts, only
a qualified electrician should carry out repairs. Improper
repairs may place the user at risk of harm.
Keep the appliance and its power supply cord out of the
reach of children.
Keep the appliance out of the reach of children when it is
switched on or cooling down.
Keep the appliance and its power supply cord away
from heat or sharp edges that could cause damage.
Keep the power supply cord away from any parts of the
appliance that may become hot during use.
Keep the appliance away from other heat emitting
appliances.
Do not allow the power supply cord to hang over
worktops, touch hot surfaces or become twisted.
Do not immerse the electrical components of this
appliance in water or any other liquid.
Do not operate the appliance with wet hands or if any
connections are wet.
Do not leave the appliance unattended whilst connected
to the mains power supply.
Do not remove the appliance from the mains power
supply by pulling the cord; switch it o and remove the
plug by hand.
Do not pull or carry the appliance by its power supply cord.
Do not use the appliance for anything other than its
intended use.
Do not use any accessories other than those supplied.
Do not use this appliance outdoors.
Do not store the appliance in direct sunlight or in high
humidity conditions.
Do not move the appliance whilst it is in use.
If this appliance falls or accidentally becomes immersed
in water, unplug it from the wall outlet immediately. Do
not reach into the water.
Always unplug the appliance after use and allow it to cool
fully before any cleaning, user maintenance or storing away.
Always use the appliance on a stable, heat-resistant
surface, at a height that is comfortable for the user.
This appliance should not be operated by means of an
external timer or separate remote control system.
Use of an extension cord with the appliance is not
recommended.
This appliance is intended for domestic use only. It
should not be used for commercial purposes.
CAUTION: Hot surface – do not touch hot sections
or heating components of the appliance.
WARNING: Boiling water and steam can cause
serious injury; exercise extreme caution when using
this appliance.
Dos and don’ts
DO:
Exercise caution when using the kettle, as steam will be emitted
from the spout and/or lid, especially whilst refilling.
Always allow the kettle to cool thoroughly before touching or
opening the lid.
Take care when returning the kettle to the base; the heating
element will remain hot after use.
Switch o the appliance and disconnect it from the mains power
supply before changing or fitting attachments.
DON’T:
Open the lid while the kettle is boiling.
Fill the kettle above its max. fill mark. Overfilling the kettle may
cause boiling water to be ejected.
Use the kettle if it has been dropped, if there are visible signs of
damage or if it is leaking.
Use the kettle if the water level is less than the minimum fill mark.
Misuse of the kettle could cause injury to the user.
Use any power supply base unit other than the one provided
with this kettle.
Put any liquid other than water into the kettle.
Boil-dry sensor
The kettle is equipped with a boil-dry sensor. If the kettle is
accidentally turned on whilst empty, the boil-dry sensor will
activate causing the power to switch off. The kettle will then
remain inactive and the power switch will not function for
several minutes until the kettle is cool. Do not try to use the
kettle during this time; once it has cooled down, it will resume its
normal function.
Care and maintenance
Wipe the kettle and power base with a soft, damp cloth then
allow it to dry thoroughly.
Never use harsh or abrasive cleaning detergents or scourers to
clean the kettle, as this could cause damage.
Removing limescale
Limescale can develop over time and may aect the performance
and lifespan of the kettle.
It is recommended to descale the kettle regularly, at least once
every three months, especially if the kettle is used in a hard
water area. Frequent descaling will improve the performance
and lifespan of the kettle.
STEP 1: Fill the kettle to the max. fill mark with cold water.
STEP 2: Add a commercial descaling agent to the kettle, adhering
to the manufacturer’s instructions. It is not recommended to use
vinegar to descale the kettle.
STEP 3: Allow the kettle to boil, switch it o and leave to soak
for at least 20 minutes or for the length of time specified on the
descaling product.
STEP 4: Empty the kettle and refill to the max. fill mark with clean
water. Boil the kettle once more and pour the water away after it
has cooled. The kettle should now be descaled.
NOTE: If the kettle switches o before it has boiled or
a white deposit is noticed on the inside of the kettle,
it needs to be descaled. Add a commercial descaling
agent to the kettle, adhering to the manufacturer’s
instructions. It is not recommended to use vinegar to
descale the kettle.
Instructions for use
Before first use
Before using the kettle for the first time, wipe it clean with a soft,
damp cloth and dry thoroughly.
Check that the limescale filter is attached.
Produktspezifikationen
Marke: | Salter |
Kategorie: | Wasserkocher |
Modell: | EK6552 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Salter EK6552 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wasserkocher Salter
2 Juli 2025
Bedienungsanleitung Wasserkocher
- Studio
- AccuTemp
- Heaven Fresh
- Rangemaster
- Swan
- Essentiel B
- Duronic
- Signature
- Westinghouse
- Jocel
- Alessi
- BEKO
- Hanseatic
- Ambiano
- Emerio
Neueste Bedienungsanleitung für -Kategorien-
1 Juli 2025
1 Juli 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
30 Juni 2025
29 Juni 2025