Satco S11981 Bedienungsanleitung
Seiten 6 Monitor
Lies die Bedienungsanleitung für Satco S11981 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 6 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage

WARNING:To avoid potential fire or shock hazard, do
not use this retrofit kit in luminaries employing shunted
bi-pin lampholders. If implementing single ended-wiring
option.NOTE: Shunted lamp holders are found only in
fluorescent luminaries with instant-start ballasts.
Instant-start ballasts can be identified by the words
“Instant Start” or “I.S.” marked on the ballast.This
designation may be in the form of a statement pertaining
to the ballast itself, or may be combined with the marking
for the lamps with which the ballast is intended to be used,
for example F40T 12/IS, for more information contact the
LED luminaire retrofit kit manufacturer.
and S8002, 10W
Emergency LED driver.
Model NumberVolts
Minimum Lamp
Compartment Dimensions
(Length x Width x Height)
Lamp
Quantity
Lamp-to-Lamp
Spacing
S11980-9T8/LED/24-830/BP/USA
120-277V
24 1/8 x 13 1/2 x 1 7/8 inches
(610 x 340 x 45 mm)
4
3 3/16 inches
(80mm)
Models: S11980, S11981, S11982,S11983
S11981-9T8/LED/24-835/BP/USA
S11982-9T8/LED/24-840/BP/USA
S11983-9T8/LED/24-850/BP/USA
Produktspezifikationen
| Marke: | Satco |
| Kategorie: | Monitor |
| Modell: | S11981 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Satco S11981 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten