Scanstrut Flip Pro Max SC-USB-F3 Bedienungsanleitung

Lies die bedienungsanleitung für Scanstrut Flip Pro Max SC-USB-F3 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu Scanstrut Flip Pro Max SC-USB-F3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

FLIP PRO MAX- DUAL USB-C CHARGER - (SC-USB-F3)

04-04-2023 (Issue 1)

Installation Instructions

For further installation

and warranty information

please visit:

www.scanstrut.com

USA

+1 860 308 1416

[email protected]

UK & International

+44 (0)1392531280

[email protected]

12V SocketGasketLock Ring

Front install only

Front Fit Bezel

No.6x20mm

Screws

Parts list:

x1x1

x1

x4

x1

55.0mm

(2.17”)

ø32.0mm

1mm (6/64”)

(ø1.26 ”)

BEZEL 68.1mm

(2.68”)

BEZEL 51.0mm

(2.01”)

42.0mm

(1.65”)

44.1mm

(1.73”)

TOP

Drilling template:

WARNING CHECK SCALE 1:1

Feed Barrel through the gasket and

hole.

Use drilling template to drill ø32mm

(1 1/4”) hole.

FRONT INSTALL ONLY

Draw a centre line to align template,

ensure line is square on surface and

correct orientation.

FRONT INSTALL ONLY

Drill 2 pilot holes for front t bezel.

Ø32mm

(1.25”)

3mm (0.11”) Min

25mm (1”) Max

90°

TOP

123

4

Pilot Hole Size

Material No. 6 Screw

Soft Material e.g Plywood2.5mm (3/32”)

Hard Material e.g Fiberglass3mm (1/8”)

Connect to 12/24V supply, ensuring a waterproof

connection. Fuse and select cable diameter according to

input voltage and current for your specic installation.

TOP

6 5

FRONT INSTALL ONLY

Apply silicone seal on xings and pilot holes. Place the

front t bezel over charger and x bezel in place. Make

sure the orientation bezel is correct.

REAR INSTALL ONLY

Tighten lock ring onto product until secure.

32mm (1 1/4”) Hole sawDrill

Front install only

Drill bit 2.5mm (3/32”) or

3mm (1/8”)Pozi Screwdriver

Silicone

Tool list:

Technical information:

For latest tech info visit:

www.scanstrut.com/USB

READ IMPORTANT SAFETY INFORMATION BEFORE

INSTALLING.

Input voltage

12/24V System

10-32V DC

Input current Max6 A

Output Type C

(12V System)

5V3A, 9V3A, 12V3A MAX ⎓⎓⎓

Output Type C

(24V System)

5V3A, 9V3A, 12V3A, 15V3A, ⎓⎓⎓⎓

20V3A MAX⎓

Standby draw<0.1W

Waterproof ratingIPX4 Front

Produktspezifikationen