Scanstrut Flip Pro SC-12V-F1 Bedienungsanleitung
Scanstrut
Nicht kategorisiert
Flip Pro SC-12V-F1
Lies die bedienungsanleitung für Scanstrut Flip Pro SC-12V-F1 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Scanstrut Flip Pro SC-12V-F1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
FLIP PRO 12V POWER SOCKET - (SC-12V-F1)
17-05-2023 (Issue 2)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
12V Socket Gasket Lock Ring
Front install only
Front Fit Bezel
No.6x20mm
Screws
Parts list:
x1 x1
x1
x4
x1
55.0mm
(2.17”)
ø32.0mm
1mm (6/64”)
(ø1.26 ”)
BEZEL 68.1mm
(2.68”)
BEZEL 51.0mm
(2.01”)
42.0mm
(1.65”)
44.1mm
(1.73”)
TOP
Drilling template:
WARNING CHECK SCALE 1:1
Certication.
Scanstrut Ltd, declares the product
‘Flip Pro Max’ SKU: SC-MULTI-F1 is in compliance
with EMC CE-RED Directive (2014/30/EU) & The
CE certicate of EN55032, EN55035, EN61000
conformity can be found at
www.scanstrut.com/uk/compliance
WARNING:
This product is to be connected to a 12V DC battery
power source only. The power supply must be
switched off before installation.
An appropriate fuse or circuit breaker must be
used between the battery / power source and this
product. Check for correct polarity of all wiring
before switching the power on.
This product may contain high voltages. Do not
tamper with the product.
This product is NOT approved for use in hazardous/
ammable atmospheres.
Do NOT install in a hazardous/ammable
atmosphere e.g. engine room.
Before drilling any holes, ensure the area behind the
mounting location is clear of wires, fuel and all other
hazardous objects.
Ensure any holes cut will not signicantly weaken the
structure of the mounting surface.
If the product needs to be mounted outside, it must
be mounted in a location safely above the waterline,
where it is not at risk of being submerged.
CAUTION:
This product is to use with 12v cigarette lighter
plug only.
This product does not contain any user serviceable
parts. DO NOT attempt to repair or modify the
product in any way.
When used in high ambient temperature or in direct
sunlight, the product may turn off temporarily, this is
a safety feature of the electronics.
The IP protection rating is only valid if the installation
is carried out correctly according to the instructions
and on a perfectly at, smooth and non-porous
surface.
When choosing a mounting location, avoid areas
exposed to heat radiation devices and areas with
poor ventilation
WIRING:
Professional electrician installation recommended,
see Technical Information for power requirements.
To achieve max power output, the specied voltage
must be at the charger. Battery performance and
voltage drop needs to be considered for installation.
ENVIRONMENTAL PROTECTION:
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for
recycling advice.
IMPORTANT:
Scanstrut Ltd & Inc. accepts no responsibility for
any injuries or other damages arising from the use of
their products in any circumstances.
WARRANTY:
A 2 year, non-transferrable warranty covers this
Scanstrut product only and not any devices that
are charged by it. No warranty is given for users’
devices and users expose their devices to hazards,
known or unknown, at their own risk.
Connect to 12/24V supply, ensuring a waterproof connection. Fuse and select cable diameter
according to input voltage and current for your specic installation.
* If using a 24V system a voltage converter is required *
Feed Barrel through the gasket and hole.
Use drilling template to drill ø32mm
(1 1/4”) hole (see tools required).
Draw a centre line to align template, ensure
line is square on surface and correct
orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
TOP
1 2
3 4
6
5
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the orientation bezel is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
Input voltage
12/24V System
10-15V DC
Input current Max 10 A
Output Type
12V 10A⎓
Standby draw <0.1W
Waterproof rating IPX4 Front
Technical information:
For latest tech info visit:
www.scanstrut.com/USB
READ IMPORTANT SAFETY
INFORMATION BEFORE
INSTALLING.
Produktspezifikationen
| Marke: | Scanstrut |
| Kategorie: | Nicht kategorisiert |
| Modell: | Flip Pro SC-12V-F1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Scanstrut Flip Pro SC-12V-F1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Scanstrut
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
Bedienungsanleitung Nicht kategorisiert
- Instant
- For_Q
- Bühnen
- Vixen
- Cleveland
- AbleNet
- Texsport
- American BioTech Supply
- Foliatec
- MoTip
- Kata
- Targus
- Qubino
- Riello
- Deaf Bonce
Neueste Bedienungsanleitung für -Kategorien-
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025
4 August 2025