Silent Knight SD500-ANM Bedienungsanleitung

Lies die bedienungsanleitung für Silent Knight SD500-ANM (2 Seiten) kostenlos online; sie gehört zur Kategorie Detektor. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu Silent Knight SD500-ANM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

P/N 151109

SD500-ANM

Installation Instructions

The following instructions are a quick reference

guide, refer to the control panel installation

manual for detailed system information.

The SD500-ANM (Addressable Notification

Module) is an output accessory module for the

IntelliKnight Fire Control Panel, which provides

one reverse polarity supervised notification

appliance circuit. The notification circuit can be

configured in either Class A (Style Z) or Class B

(Style Y).

SD500-ANM Specification

Table 1 list the electrical, physical and

environmental specifications of the SD500-

ANM.

Note:When calculating total alarm current, add the

current ratings of all the notification devices on the

notification circuit.

Wiring the SD500-ANM

Note:Installation and wiring of this device must be done

in accordance with NFPA 72 and local ordinances.

Important!:All wiring is supervised and power limited.

Connecting SD500-ANM to the SLC

The SD500-ANM connection for the SLC loop

internal and external are the same. Wire as

shown in Figure 1.

Figure 1: SD500-ANM Connections to the 5815XL

Table 1: SD500-ANM Specs

Specification ParameterRating

Operating Temperature:

32° - 120° F

(0° - 49° C)

Dimensions:

Length:4-7/8”

Width:4-7/8”

Depth:7/8”

Operating Voltage:24 VDC

Notification Appliance Current:2 A max.

Notification Outputs24 VDC

Full Wave Rectified

SLC Current:.55 mA

Max. SLC Loop Resistance:50 Ω

Max Impedance Output1.5 Ω

For indoor use only

Produktspezifikationen