Soler & Palau THE 16/4A Bedienungsanleitung

Lies die bedienungsanleitung für Soler & Palau THE 16/4A (1 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 5 Bewertungen. Hast du eine Frage zu Soler & Palau THE 16/4A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Technical characterisƟcs

Mounng: Wall mount

Protecon class: Class I

Protecon: IP 54

Weight: 310 gr

Temperature range: 0 ... 40°C

Ambient temperature limits: -20/+50°C

Accuracy: ± 2 K a 40°C / ± 4 K a 0°C

Maximum load: (*resisve load **inducve load)

- Connecon 1-3: 16* (4**)A 250 VAC, 10* (4**)A 400 VAC

- Connecon 1-2: 8* (4**)A 250 VAC, 4* (2**)A 400 VAC

Dimensions

Ambient thermostat THE 16/4

Ambient thermostat THE 16/4A

Technical assistance

The wide range of S&P Offi cial Services network guaran-

tees competent technical assistance anywhere. If any ano-

malies are observed in this device, please contact any of

Technical Services on the list to deal with your problem.

Any manuipulaon done over this device by others out of

S&P Offi cial Services will lead to cancel guarantee.

Recycling

EU regulaons and our commitment to future generaons

oblige us to recycle used materials; please remember to

dispose of all unwanted packaging materials at the appro-

priate recycling points, and to drop off obsolete equip-

ment at the nearest waste management point.

Soler & Palau reserves the right to modify this manual without prior

noce.

THE 16/4 & THE 16/4A THERMOSTAT

We recommend to verify if model and features correspond

to device ordered. This product must be stored in its orig-

inal packaging, in a dry place and protected from outdoor.

Storage temperature between -10ºC and +40ºC.

Use

The thermostat controls a load unl 16A if this is resisve

(heater) and unl 4A if the load is inducve (motor).

Ambient thermostat THE 16/4

Adjustment is made with potenometer on the product

cover.

Ambient thermostat THE 16/4A

Adjustment potenometer is located inside the device.

To change the setpoint it is required to remove the cover.

InstallaƟon and maintenance

Thermostat has to be installed in a suitable place where

local temperature is representave with air circulaon.

Do not install in a corner without air movement, near a

heater or a window, nor in a place exposed to sun light.

Ambient thermostat THE 16/4

To wire it, remove the knob and cover.

Ambient thermostat THE 16/4A

To wire it, remove the cover of the box.

Electrical connecon as indicated in wiring diagram.

Electrical connecƟon

Before installing and connecƟng this device, be sure that

power supply is disconnected.

The installaon has to be done by a qualified professional

and should be done in accordance with current local re-

gualaons.

Wire as indicated in following wiring diagram:

Earth

Normally Closed contact

Normally opened contact

Common

Winter: COM-NC, when temperature selected is reached,

heang system is stopped.

Summer: COM-NO, when temperature selected is

reached, venlaon system is acvated.

Produktspezifikationen