Sony HZC-MSCN1 Bedienungsanleitung


Lies die bedienungsanleitung für Sony HZC-MSCN1 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Sony HZC-MSCN1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
CAMERA OPERATING SOFTWARE
HZC-MSCN1
USER’S GUIDE [English]
1st Edition
Overview
2
Overview
The HZC-MSCN1 is optional software for the CNA-1
Camera Control Network Adaptor. Installing this
CNA-1 by expanding the Gateway function of the CNA-
1.
Camera selecting function
You can use the camera selecting command with the
HZC-MSCN1 to the CNA-1 and setting the Gateway
Emulation mode of the CNA-1 to MSU.
You can then select the camera, and control it by using the
simple protocol.
Target device for installing the HZC-
MSCN1
This software can be installed to the CNA-1 Camera
higher.
Examples of System Configurations
3
Examples of System Configurations
Controlling multiple Sony cameras from the expanded panel device
Note
The expanded panel device needs to be compatible with the protocol that is supplied by the CNA-1.
CNA-1 setup
For details about the setting items, see “Menu operation” on the CNA-1 Operation Manual.
CNS Configuration CNS Mode MCS
Master Mode Disable
Master IP Address IP address of Master MSU
Target IP Address No need to input
Gateway Configuration Gateway Mode Enable
Emulation Mode MSU
Network hub
: LAN cable
Expanded panel device
Camera head
MSU
MCS Mode: Master
CNA-1
CCU
MCS Mode: Client
Camera head
CCU
MCS Mode: Client
Camera head
CCU
MCS Mode: Client


Produktspezifikationen

Marke: Sony
Kategorie: Nicht kategorisiert
Modell: HZC-MSCN1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sony HZC-MSCN1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten