StarTech.com 1M25-U3-M2-ADAPTER Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com 1M25-U3-M2-ADAPTER (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 5 Bewertungen. Hast du eine Frage zu StarTech.com 1M25-U3-M2-ADAPTER oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 16, 2023 4:13 PM

Product ID

1M25-U3-M2-ADAPTER

ComponentFunction

1

M.2 to U.3 Adapter

Mounting Holes

• Secure the M.2 to U.3 Adapter to the Computer

Case’s Drive Mounting Bay

2

Stando, Stando

Installation Screw, and

Drive Mounting Screw

• Secure an to theM.2 Storage Device M.2 to U.3

Adapter

• Compatible (NVMe): 2242, 2260, PCIe M.2 SSDs

and 2280 drives

3M.2 Connector

• Connect a to the M Keyed M.2 Storage Device

M.2 to U.3 Adapter

4U.3 Connector

• Connect the to aM.2 to U.3 Adapter U.3 Host

Controller

M.2 NVMe to U.3 (SFF-TA-1001) Adapter

Requirements

• U.3 (SFF-TA-1001) Enabled Computer x 1

• M.2 NVMe Drive x 1

Note: The M.2 to U.3 Adapter does not support SATA M.2 Drives

For the latest product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/1M25-U3-M2-ADAPTER

Package Contents

• M.2 to U.3 Adapter x 1

• Quick-Start Guide x 1

Installation

Warning: Circuit Boards can be damaged by static electricity. Ensure that the

InstallerComputer Case is properly grounded before opening the or touching

the . The should wear an when M.2 to U.3 AdapterInstallerAnti-Static Strap

installing any computer component. If an is not available, Anti-Static Strap

discharge any built-up static electricity by touching a large Grounded Metal

SurfaceM.2 to U.3 Adapter for several seconds. Only handle the by its edges and

do not touch the gold connectors.

Install the M.2 NVMe Storage Device

1. Place the next to the and note the M.2 DriveAdapterDrive Installation Holes

that match the length of the . If the and M.2 DriveStandos Installation Screws

are already installed in the correct position, proceed to step 6.

2. On the front of the use to hold the in place M.2 to U.3 Adapter,PliersStando

while using a to remove the located on the back Phillips Head ScrewdriverScrew,

of the . Adapter

3. Use the to remove the on the front of the Phillips Head ScrewdriverScrewM.2 to

U.3 Adapter.

4. Remove the .Stando

5. Install the in the that matches the length of the StandoDrive Installation Hole

Drive.

6. Gently slide the into the corresponding M.2 Drive Connector M.2 Connector,

locatedon the and press the down toward the adapter M.2 to U.3 Adapter,Drive

until the is properly seated.Drive

Note:The on the isand only ts M.2 ConnectorAdapter M KeyedM Keyed M.2

Storage Devices.

1

1

1

1

4

2

3

Produktspezifikationen