StarTech.com BRACKET225PT Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com BRACKET225PT (18 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 3 Bewertungen. Hast du eine Frage zu StarTech.com BRACKET225PT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Instruction manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 07/22/2015

For the latest information, technical specications, and support for this

product, please visit www.startech.com/BRACKET225PT.

Packaging contents

• 1 x dual 2.5 in. SSD or HDD to 3.5 in. mounting bracket

• 6 x plastic pegs

• 1 x instruction manual

System requirements

• Computer case with an available 3.5 in. hard drive bay

• One or two 2.5 in. SSDs or HDDs

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/BRACKET225PT.

BRACKET225PT

Tool-Less Dual 2.5” SSD/HDD to 3.5” Mounting Bracket

*actual product may vary from photos

Product overview

Install the drive and bracket

Warning! Hard drives and storage enclosures should be handled

carefully, especially when they’re transported. If you’re not careful

with your drives, you may experience lost data as a result. Always

handle storage devices with caution. Make sure that you’re properly

grounded by wearing an anti-static strap when you install any

computer component. If an anti-static strap isn’t available, touch a

large grounded metal surface for several seconds to discharge any

built-up static electricity.

1. Remove the plastic piece with the six pegs attached to it from the

mounting bracket.

2. Pull the six pegs o of the plastic post and discard the post.

3. Align your SSD or HDD with the tenons (plastic projections) on

the mounting bracket, and gently push the drive into place.

4. If necessary, repeat steps 3 and 4 for a second drive.

5. Turn o your computer and any peripherals that are connected

to it (for example, printers, external hard drives, and so on).

6. Unplug the power cable from the back of your computer.

7. Disconnect any peripheral devices that are connected to your

computer.

8. Place the bracket into the 3.5 in. hard drive slot and use the

included six pegs to secure the drive in place.

9. Connect a power connection from the computer’s power supply

to the drive’s power connector.

10. Use the appropriate cable and connect the drive to the host

controller.

11. Place the cover back onto your computer case.

12. Reconnect the power cable to the back of your computer and

reconnect all of the peripheral devices that you previously

disconnected.

13. Turn on your computer and any peripherals that are connected

to it.

You don’t need to install a driver, as your computer’s operating

system should detect the drive and install it automatically.

Produktspezifikationen