Stinger SPXRGBC Bedienungsanleitung


Lies die bedienungsanleitung für Stinger SPXRGBC (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Stinger SPXRGBC oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
SPXRGBC
SMART RGB LED CONTROLLER
SPECIFICATIONS
APP: EZ LED (iOS and Android)
Operating temperature: -20~80°C
Voltage: DC12V/24V,
Distance: 10-20M
Maximum output current: 10A
Outputs: 4
NOTE: Do not exceed 10 AMPS
Universal, waterproof, RGB controller with Bluetooth Control.
Before you start, review directions completely. If your vehi-
cle is not pre-wired for accessory lighting, you may need a
switch and relay.
SPXRGBC
Black - Ground
Red - Battery (12V+)
Blue - Remote In (12V+)
3
AMP
FUSE
Optional SPXRGBMF Solder Connector
Connect to optional to Universal SPXRGB5
RGB LED Strip Lights
SPXRGBC
SMART RGB LED CONTROLLER (CONT)
Stinger is a Power Brand of AAMP Global
15500 Lightwave, Clearwater, Florida 33760
P: 888-228-5560
support@stingerelectronics.com
www.stingerelectronics.com
© 2019 AAMP Global
LIMITED WARRANTY:
Stinger warrants this product to be free of defects in materials and workmanship for a period of
one (1) years from the original date of purchase. This warranty is not transferable and applies
only to the original purchaser from an authorized Stinger dealer in the United States of America
only. Should service be necessary under this warranty for any reason due to manufacturing
defect or malfunction, Stinger will (at its discretion), repair or replace the defective product with
new or remanufactured product at no charge. Damage caused by the following is not covered
under warranty: accident, misuse, abuse, product modification or neglect, failure to follow
installation instructions, unauthorized repair attempts, misrepresentations by the seller. This
warranty does not cover incidental or consequential damages and does not cover the cost of
removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear
is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that countrys
Authorized Stinger reseller and not by Stinger. Consumers needing service or warranty informa-
tion for these products must contact that countrys reseller for information.
WIRING DIAGRAM
The SPXRGBC can be wired to a
switch or to accessory power using
the BLUE lead. The RED wire should
be connected to constant power to
save the RGB light settings.
NOTE: Do not connect the Red and
BLUE to constant power and use the
app to turn the module on and off.
The module will draw power even
when turned off with the app.
Group
Device List
SCAN for Apple iOS SCAN for Android
User Guide
GET THE EZ LED APP
Scan the QR Code, or visit Google Play or iTunes to
download the app. Once the app is installed, EZ LED
power up the SPXRGBC Module and open the app.
The module should auto-connect and be listed in the
Group Device List.
EZ LED App
SPXRGBC
Black - Ground
Red - Battery (12V+)
Blue - Remote In (12V+)
3
AMP
FUSE
The BLUE wire can be connected
to a Switch (12V+) or connected to
vehicles Switched Power (12V+).
Do not connect to constant power.
Connect RED wire to constant
power (12V+).
Connect BLACK wire to
Ground.


Produktspezifikationen

Marke: Stinger
Kategorie: Beleuchtung
Modell: SPXRGBC

Brauchst du Hilfe?

Wenn Sie Hilfe mit Stinger SPXRGBC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten