TOA HY-TM7B-WP Bedienungsanleitung
TOA
Nicht kategorisiert
HY-TM7B-WP
Lies die bedienungsanleitung für TOA HY-TM7B-WP (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 18 Bewertungen. Hast du eine Frage zu TOA HY-TM7B-WP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4

1. SAFETY PRECAUTIONS
• Beforeinstallationoruse,besuretocarefullyread
all the instructions in this section for correct and
safeoperation.
• Besuretofollowalltheprecautionaryinstructions
in this section, which contain important warnings
and/orcautionsregardingsafety.
• After reading, keep this manual handy for future
reference.
Indicatesapotentiallyhazardoussituationwhich,
if mishandled, could result in death or serious
personalinjury.
WARNING
• Referallinstallationworktothedealerfromwhom
the speaker was purchased. Installation onto the
ceilingrequiresextensivetechnicalknowledgeand
experience.The speaker may fall off ifincorrectly
installed,resultinginpossiblepersonalinjury.
• Installtheunitonlyinalocationthatcanstructurally
supporttheweightofthespeakerandthemounting
bracket.Doingotherwisemayresultinthespeaker
falling down and causing personal injury and/or
propertydamage.
• Owing to the speaker's size and weight, be sure
thatatleasttwopersonsareavailabletoinstallthe
speaker. Failure todo so couldresult in personal
injury.
• Donotuseothermethodsthanspeciedtomount
thebracket.Extremeforceisappliedtothebracket
andthespeakercouldfalloff,possiblyresultingin
personalinjuries.
• Usesafetywireswheninstallingspeakers.Ifnot
used,personalinjurycould result ifa speaker
shouldaccidentallyfall.
• Attachthesafetywiretothespeaker.Ifnotattached,
thespeakercouldfalloff,resultinginpersonalinjury.
• Use nuts and bolts that are appropriate for the
ceiling’sstructureandcomposition.Failuretodoso
maycausethespeakertofall,resultinginmaterial
damageandpossiblepersonalinjury.
• Tighten each nut and bolt securely. Ensure that
the bracket has no loose joints after installation
to prevent accidents that could result in personal
injury.
• UsetheHX-7B-WPorHX-7W-WPSpeakerSystem
in combination. Doing otherwise may cause the
speakertofalloff,resultinginpersonalinjury.
• Do not mount the speaker in locations exposed
to constant vibration. The rigging bracket can be
damagedbyexcessivevibration,potentiallycausing
thespeaker tofall, which couldresult in personal
injury.
• Avoidinstallingthespeakerinlocationsclosetothe
seashoreor in indoor swimming facilities that are
not well ventilated. In such locations, the bracket
maybevulnerabletocorrosion,eventuallyallowing
thespeakertofallresultinginpersonalinjury.
Indicatesapotentiallyhazardoussituationwhich,
ifmishandled,couldresultinmoderateorminor
personalinjury,and/orpropertydamage.
CAUTION
• Avoidtouching the bracket's sharp metal edgeto
preventinjury.
• Do not stand or sit on, nor hang down from the
bracketasthismaycausethespeakertofalldown
ordrop,resultinginpersonalinjuryand/orproperty
damage.
• Havethebracketcheckedperiodicallybytheshop
fromwhereitwaspurchased.Failuretodosomay
resultincorrosionordamagetothespeakerorits
riggingbracketthatcouldcausethespeakertofall,
possiblycausingpersonalinjury.
INSTALLATION MANUAL
SPEAkER RIGGING bRACkET HY-TM7b-WP
HY-TM7W-WP
ThankyouforpurchasingTOA’sSpeakerRiggingBracket.
Pleasecarefullyfollowtheinstructionsinthismanualtoensurelong,trouble-freeuseofyourequipment.

2. GENERAL DESCRIPTION
TheHY-TM7SeriesSpeakerRiggingBracketsareusedtohangtheHX-7B-WPorHX-7W-WPSpeakerSystem
directlyfromceilings,beamsorotherbuildingstructures,includingunderoutdooreaves.
3. NOTES ON INSTALLATION
• Observethefollowinginstructionswheninstallingthespeaker
system.
Failuretodosocouldadverselyaffecttheirintendedweather-
resistantcapability,leadingtomalfunction.
· Installthespeakersysteminlocationsnotexposeddirectlyto
rain,suchasundereaves.
· Allspeakermodulesmustpointdownwardfromthehorizontal.
• Two joined HX-7 Series SpeakerSystems cannot be installed
withthisbracket.
4. INSTALLATION
Step 1. Mountthisbrackettoaceiling,beam,etc.usingthebolts.
Boltsandnutsformountingthebracketontheceilingorbeamarenot
supplied.
Use bolts and nuts that are appropriate for the ceiling’s or beam’s
structureandcomposition.Failuretodosomaycausethespeakerto
fall,resultinginmaterialdamageandpossiblepersonalinjury.
WARNING
[Mounting dimensions]
36
(1.42")
146.5 (5.77")
[Front] [Right side]
ø8.5 (0.33") (with M8 weld nut)
ø8.5 (0.33")
(with M8 weld nut)
ø8.5 (0.33")
(with M8 weld nut)
ø8.5(0.33")
(6 positions)*
353 (13.9")
60 (2.36")
100 (3.94")100 (3.94")
0
26
(1.02")
76
(2.99")
126
(4.96")
291
(11.46")
220
(8.66")
170
(6.69")
φ8.5 (0.33")*
Note: Left-side surface same.
Unit: mm
*TheseholesnotttedwithM8weldnuts.
[Vertical installation]
Horizontal

Step 2. Mountthespeakersystemtothisbracket.
Mountthespeakersystemvertically,asshowninthegure.
Fixthespeakertothemountingbracketatall3indicatedplaces.
Fixthisbrackettobothendsofthesideangleplateofthespeakerfront.2-1.
Usethesuppliedbolts(withspringandplainwashers)andspacers.
Fixthisbrackettothespeaker’srearbracket.2-2.
Fixtotherearbracket’sendmosthole.
Usethesuppliedbolt(withspringandplainwashers),J-spacer,andangenut.
Fordetails,refertotheprocedures(1)to(3)asshownbelow.
• Use safety wires when installing speakers. If not used, personal
injurycouldresultifaspeakershouldaccidentallyfall.
• Owing tothe speaker'ssizeandweight, besure thatatleast two
personsareavailabletoinstalltheunit.
Failuretodosocouldresultinpersonalinjury.
• Tighten the bolts securely, as instructed below. Failure to follow
instructions preciselycouldresultinafallingspeakerandpotential
personalinjury.
· Ensurethatallboltsaresecurelyinsertedasfarastheirthreadsgo,
thensecurelyfasteneachboltwithanut.
· Tighten all the bolts with the designated tightening torque. For
tightening,useaPhillipsscrewdriver,oropen-orbox-endwrench.
WARNING
This bracket
HX-7B-WP or HX-7W-WP
J-spacer
(accessory)
Rear bracket
(1) Lightly secure.
(3) Tighten firmly.
(2) Insert.
Flange nut
for M6 (accessory)
Hex head
bolt M6x30
(accessory)
Tightening
torque: 5 N·m
Spacer ø9.2 (0.36")
(accessory)
Hex head bolt
M6x12(accessory)
Side angle plate
Protection cover
Note
Remove the
protection covers
from the side
angle plates
before joining.
Tightening torque:
5 N·m
2-1
Note
Similarly, fix this bracket to the end of the
side angle plate on the opposite side.
2-2
This bracket
HX-7B-WP or HX-7W-WP
[Completed installation]
Step 3. Attachsafetywiresforprotectionagainstfalls.
Regardingtheattachingmethodofsafetywires,
refertotheoperatinginstructionssuppliedwith
HX-7Seriesspeakersystem.
Note
Aftertighteningthebolt,ensurethat
theJ-spacerisrmlyxed.
Produktspezifikationen
Marke: | TOA |
Kategorie: | Nicht kategorisiert |
Modell: | HY-TM7B-WP |
Breite: | 433 mm |
Tiefe: | 295 mm |
Gewicht: | 2500 g |
Produktfarbe: | Schwarz |
Höhe: | 57 mm |
Material: | Edelstahl |
Menge pro Packung: | 1 Stück(e) |
Kompatibilität: | HX-7B-WP |
Schrauben enthalten: | Ja |
Brauchst du Hilfe?
Wenn Sie Hilfe mit TOA HY-TM7B-WP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert TOA
20 September 2024
19 September 2024
6 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024
1 September 2024
1 September 2024
Bedienungsanleitung Nicht kategorisiert
- Cane Creek
- Elektrobock
- Fisher-Price
- Turbo Air
- Bionaire
- Cooler Master
- Patton
- Primo
- Küppersbusch
- Thermalright
- Parklands
- EnVivo
- Allibert
- Alfen
- Whirlwind
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025